company blog about Supply Automotive Grade MCU SPC564A70L7COBR 32-bit Microcontroller for Automotive Powertrain Applications

Shenzhen Mingjiada Electronics Co., Ltd. (Distribution ST) Automotive Grade MCU SPC564A70L7COBR 32-bit Power Architecture Microcontroller for Automotive Powertrain Applications, Brand New & Original, Quality Assurance!

Product Model:SPC564A70L7COBR
Lot: New 23+
Package: LQFP-176

Description
This SPC564A70L7COBR microcontroller is a 32-bit system-on-chip (SoC) device designed for mid-range engine control and automotive transmission control applications.
It is compatible with the STMicroelectronics SPC56xx family of devices and offers higher performance and functionality than the SPC563M device.

Features
■ 150 MHz e200z4 Power Architecture® core
- Variable length instruction encoding (VLE)
- Superscalar architecture unit with 2 execution units
- Up to 2 integer or floating-point instructions per cycle
- Up to 4 multiply and accumulate operations per cycle Per cycle
■ Memory organization
- 2 MB on-chip Flash with ECC and Read-Write-While-Writing (RWW)
- 128 KB on-chip SRAM with standby (32 KB) and ECC
- 8 KB instruction cache (line-locked), configurable as 2- or 4-way
- 14 + 3 KB eTPU code and data RAM
- 4 × 4 crossbar switches (XBAR)
- 24-input MMU
■ Fail-safe protection
- 16 Memory Protection Units (MPUs)
- CRC unit with 3 submodules
- Junction temperature sensor
■ Interrupts
- Configurable Interrupt Controller (INTC) with non-maskable interrupts (NMI)
- 64-channel eDMA
■ Serial channels
- 3 eSCI modules
- 3 DSPI modules (2 of them support downstream microsecond channels [MSC])
- 3 FlexCAN modules with 64 message buffers each
- 1 FlexRay module (V2.1) up to 10 Mbit/s dual or single channel, 128 message objects, ECC
■ 1 eMIOS (24 unified channels)
■ 1 eTPU2 (second generation eTPU)
- 32 standard channels
- 1 Reaction Module (6 channels with 3 each) 1 Reaction Module (6 channels with 3 outputs each)
2 Enhanced Queue Analog-to-Digital Converters (eQADC) 2 Enhanced Queue Analog-to-Digital Converters (eQADC)
- 40 12-bit input channels
- 688 ns minimum conversion time
■ On-chip CAN/SCI boot loader with boot assist module (BAM) Boot assist module (BAM)
■ Nexus kernel at Level 3+; eTPU at Level 1
■ JTAG (5-pin)
■ Development Trigger Signal (DTS)
■ Clock generation
- On-chip 4-40 MHz master oscillator
- On-chip FMPLL (frequency modulated phase-locked loop)
■ Up to 112 general-purpose I/O lines
■ Power reduction modes: slow, stop, and standby Standby
■ Flexible power supply options
- 5 V single supply with external ballast
- Multiple external supplies: 5 V, 3.3 V and 1.2 V
■ Designed for LQFP176

If you are interested, please contact Mr. Chen by phone:
Tel: +86 13410018555
Email: sales@hkmjd.com
Company Home Page: www.hkmjd.com