Mingjiada Electronics sells 4G module EC600SCNLA-N06-SNNSA wireless communication module, brand-new original, quality assurance, affordable price, the actual single has to accept the price can be discussed in detail!
Quectel EC600S-CN is a LTE-FDD/LTE-TDD/GSM wireless communication module that supports LTE-FDD, LTE-TDD, EDGE and GPRS network data connectivity, and can provide voice functionality for customer-specific applications.
Main Performance
Parameter
Power supply
● VBAT supply voltage range: 3.3-4.3V
● Typical supply voltage: 3.8V
Transmitter Power
●Class 4 (33 dBm ±2 dB) for EGSM900
●Class 1 (30 dBm ±2 dB) for DCS1800
●Class E2 (27 dBm ±3 dB) for EGSM900 8-PSK
●Class E2 (26 dBm ±3 dB) for DCS1800 8-PSK
●Class 3 (23 dBm ±2 dB) for LTE-FDD bands
●Class 3 (23 dBm ±2 dB) for LTE-TDD bands
LTE Features
●Maximum support for Cat 1 FDD and TDD
Supports 1.4/3/5/10/15/20 MHz RF bandwidth
●LTE-FDD: Maximum downlink rate 10 Mbps, maximum uplink rate 5 Mbps
LTE-TDD: Maximum downlink rate 7.5 Mbps, maximum uplink rate 1 Mbps
GSM characteristics
GPRS:
●Support GPRS multi-slot class 12
●Coding format: CS-1/CS-2/CS-3/CS-4
●Maximum downlink rate 85.6 kbps, maximum uplink rate 85.6 kbps
EDGE:
●Supports EDGE multi-timeslot class 12
Supports GMSK and 8-PSK modulation coding methods
●Downlink coding format: CS 1-4 and MCS 1-9
Uplink coding format: CS 1-4 and MCS 1-9
Maximum downlink rate 236.8 kbps, maximum uplink rate 236.8 kbps
Network Protocol Features
●Support TCP/UDP/PPP/NTP/NITZ/FTP/HTTP/PING/CMUX/HTTPS/FTPS/SSL/FILE/MQTT/MMS*/SMTP*/SMTPS* Protocols
●Support PAP and CHAP protocols
Short Message Service (SMS)
●Text and PDU modes
●Peer-to-peer SMS sending and receiving
●SMS Cell Broadcast
●SMS storage: currently stored in (U)SIM card
(U)SIM interface
●Support for USIM/SIM: 1.8 V and 3.0 V
Network protocol features
● TCP/UDP/PPP/FTP/HTTP/NTP/PING/QMI/NITZ/CMUX/HTTPS/SMTPprotocol support
● Support PAPand CHAP .
Audio Features
● Support 1 digital audio interface: PCM interface
GSM: HR/FR/EFR/AMR/AMR-WB
●Supports echo cancellation and noise suppression
PCM interface
●For audio use, external codec chip is required.
USB Interface
●Compatible with USB 2.0 (slave mode only), data transfer rate up to 480 Mbps
●For AT command transfer, data transfer, software debugging and software upgrades
●USB virtual serial port driver: supports Windows 7/8/8.1/10, Linux 2.6~5.4.
● USB driver for Android 4.x~9.x and other operating systems.
Serial port Main serial port:
●For AT command transmission and data transfer
●Baud rate is 115200 bps by default.
●Support RTS and CTS hardware streaming.
Debugging Serial Port:
●For partial log output
●Baud rate is 115200 bps.
AT commands
●Commands defined in 3 GPP TS 27.007 and 3 GPP TS 27.005, as well as the Remote Communications Enhanced AT commands
Network Instructions
NET_MODE and NET_STATUS pins to indicate network status
Antenna Interface
● Main Antenna Interface (MAIN_ANT)
●50 Ω characteristic impedance
Physical Characteristics
Dimensions: (22.9 ±0.15) mm × (23.9 ±0.15) mm × (2.4 ±0.2) mm
Software Upgrade
Upgradeable via USB interface or FOTA
RoSH
All devices are fully compliant with EU RoHS.
The company also distributes the following wireless communication series models:
EC800GCNGA-I05-SGNSA
EC600MCNLC-I03-SNNDA
EC20CEFHLG-128-SNNS
ec600scnla-n06-sgnsa
ec600ucnlb-n05-snnsa
Company homepage: http://www.hkmjd.com/
Your message must be between 20-3,000 characters!
