company blog about Supply Microchip AVR64EA32-E/PT Microcontroller MCU

Supply Microchip AVR64EA32-E/PT Microcontroller MCU

Description
AVR64EA32-E/PT microcontrollers of the AVR® EA Family are using the AVR® CPU with hardware multiplier running at clock speeds up to 20 MHz.

Feature
Running at up to 20 MHz
Single-cycle I/O register access
Two-level interrupt controller
Two-cycle hardware multiplier
Supply voltage range: 1.8-5.5V
Power-on Reset (POR) circuit
Brown-out Detector (BOD) with user-programmable levels
Voltage Level Monitor (VLM) with interrupt at a programmable level above the BOD level
Clock Failure Detection (CFD)
Internal ultra-low power 32.768 kHz oscillator
External 32.768 kHz crystal oscillator
External clock input
External high-frequency crystal oscillator with clock failure detection
Idle with all peripherals running for immediate wake-up
Standby with a configurable operation of selected peripherals
Power-Down with full data retention
Two 16-bit Timer/Counters type A (TCA) with three compare channels for PWM and waveform generation
Four 16-bit Timer/Counters type B (TCB) with input capture for capture and signal measurements
One 16-bit Real-Time Counter (RTC) that can run from an external crystal or internal oscillator
Three USARTs with fractional baud rate generator, auto-baud, and start-of-frame detection
One host/client Serial Peripheral Interface (SPI)
One Two-Wire Interface (TWI) with dual address match
Independent host and client operation (Dual mode)
Philips I2C compatible
Standard-mode (Sm, 100 kHz)
Fast-mode (Fm, 400 kHz)
Fast-mode Plus (Fm+, 1 MHz)
Event System for CPU-independent and predictable inter-peripheral signaling
Configurable Custom Logic (CCL) with up to four programmable Look-up Tables (LUTs)
One 12-bit, 375 ksps, differential Analog-to-Digital Converter (ADC)

Applications
Industrial
Consumer
Appliance
Closed-loop control systems
Automotive
IoT
Sensor nodes
Secondary safety monitoring