company blog about Supply【MPS Sensors】 MCS1806GS-5-10 Isolated Hall-Effect Current Sensor

Supply【MPS Sensors】 MCS1806GS-5-10 Isolated Hall-Effect Current Sensor

Product Description
MCS1806GS-5-10 is a linear Hall effect current sensor for AC or DC current sampling with a current detection value of ±10A. Its Hall array is differential and can cancel out any stray magnetic field. With low resistance, it allows current to flow near an IC containing a high-precision Hall effect sensor. The magnetic field generated by this current is sampled at two different points by an integrated Hall effect sensor and is suitable for multiphase inverters, motor control, automotive systems, load detection and management, switching mode power supply and overcurrent fault protection applications.

Product Attributes:
Used for measurement: AC/DC
Sensor type: Hall effect, differential
Current - Detection: ±10A
Number of channels: 1
Output: ratio, voltage
Sensitivity: 200mV/A
Frequency: 100kHz
Linearity: ±0.5%
Accuracy: ±2.5%
Voltage - Power supply: 4.5V ~ 5.5V
Response time: 5µs
Current - Power supply (Max.) : 10.5mA
Operating temperature: -40°C ~ 125°C (TJ)
Polarization: bidirectional
Mounting type: Surface mount type
Package/housing: 8-SOIC (0.154", 3.90mm wide)
Supplier device package: 8-SOIC

Feature
3.3V or 5V Single-Supply Options
Immune to External Magnetic Fields viaDifferential Sensing
3kVRMS Minimum Isolation Voltage
500VRMS Maximum Working Voltage
±2.5% Total Accuracy
0.9mΩ Internal Conductor Resistance
±5A to ±50A Bidirectional Range
Adjustable Bandwidth Up to 100kHz
Ratiometric Output from Supply Voltage
Output Proportional to AC or DC Currents
Factory-Trimmed for Accuracy
No Magnetic Hysteresis
Available in an SOIC-8 Package

Applications
Multi-Phase Inverters
Motor Controls
Automotive Systems
Load Detection and Management
Switch-Mode Power Supplies
Over-Current Fault Protection