|
Product Details:
|
| Highlight: | LTC4228CGN-2 Integrated Circuit Chip Ideal Diode and Hot Swap Controller Auto-Retry 28-Lead SSOP,LTC4228 |
||
|---|---|---|---|
The LTC4228CGN-2 combines ideal diode and Hot Swap functions for two power rails by controlling two external N-channel MOSFETs in each rail. MOSFETs used as ideal diodes replace two high power Schottky diodes and their heat sinks, which saves both power and board area.
The Hot Swap MOSFETs limit inrush current so a board can be inserted into and removed from a live backplane safely. The device regulates the forward voltage drop across the external MOSFET and sense resistor to keep current transfer between the two supplies smooth and free from oscillation.
The input range is 2.9 V to 18 V. A fast current limit responds in 1 microsecond or less, the circuit breaker trip point is 50 mV typical across the sense resistor, and the fault delay is set with a capacitor on the TMR pin. Ideal diode turn-on and turn-off take 0.5 microseconds, which keeps load droop small during switchover.
Status, fault and power good outputs report the state of each rail, and the two rails can be switched independently. This LTC4228-2 version retries automatically after a fault, while the LTC4228-1 version latches off until it is reset.
The LTC4228CGN-2 is the commercial grade part in the 28-Lead Plastic SSOP package, specified from 0 to 70 degrees C. It is RoHS compliant and lead free, and every order ships with full traceability. Samples and volume pricing are available on request.
| Series | LTC4228 |
|---|---|
| Part Number | LTC4228CGN-2 |
| Function | Dual ideal diode and Hot Swap controller |
| Input Supply Range | 2.9 V to 18 V |
| Absolute Maximum IN | 24 V |
| Input Supply Current | 2.5 mA typ, 5 mA max |
| Internal Regulator Voltage | 4.5 V / 5 V / 5.6 V (INTVCC) |
| INTVCC Undervoltage Lockout | 2.1 V / 2.2 V / 2.3 V rising, 60 mV hysteresis |
| Ideal Diode Forward Regulation | 10 mV / 25 mV / 40 mV (VIN - VOUT) |
| External N-Channel Gate Drive | 5 V to 14 V (DGATE - IN) |
| Circuit Breaker Trip Sense Voltage | 47.5 mV / 50 mV / 52.5 mV |
| Active Current Limit Sense Voltage | 55 mV / 65 mV / 75 mV |
| SENSE+ Undervoltage Lockout | 1.75 V / 1.9 V / 2.05 V rising, 50 mV hysteresis |
| Ideal Diode Turn-On / Turn-Off | 0.5 microseconds |
| Peak Fault Current Response | 1 microsecond or less |
| Fault Response | Automatic retry after fault |
| Status Outputs | STATUS, FAULT and PWRGD per rail |
| Channels | Two rails, independent on/off control |
| Operating Temperature | 0 to 70 degrees C |
| Package / Case | 28-Lead Plastic SSOP |
| RoHS | RoHS compliant, lead free |
Typical use is a 12 V plug-in card that takes power from either of two backplane feeds without interruption.
Shenzhen Mingjiada Electronics Co., Ltd. is an independent distributor of electronic components from established manufacturers. Founded in Shenzhen in 1996, Mingjiada has established branches in Hong Kong, Japan, Russia, and Taiwan.
Certified under ISO9001:2014 for quality management systems and ISO14001:2014 for environmental management systems. With an experienced team in sales, R&D and management, we specialize in distributing products from more than 500 established suppliers.
Adhering to the principle of "maximizing benefits for customers," we offer comprehensive product ranges and provide high-quality, responsive service through professional logistics and customer service teams.
Other product types we regularly stock and supply appear below.
| Part Number | Series |
|---|---|
| ADS8331IPWR | ADS8331 |
| ADS8331IRGER | ADS8331 |
| ADS8331IBPWR | ADS8331 |
| ADS5411IPGPR | ADS5411 |
| ADS5423IPGPR | ADS5423 |
| ADS8201IRGER | ADS8201 |
| ADS1015IDGSR | ADS1015 |
| ADS1013IDGSR | ADS1013 |
| ADS8558IPMR | ADS8558 |
| ADS1114IRUGR | ADS1114 |
| ADS1114IDGSR | ADS1114 |
| ADS1113IRUGR | ADS1113 |
| ADS1113IDGSR | ADS1113 |
| ADS62P28IRGCR | ADS62 |
| ADS1130IPWR | ADS1130 |
| ADS1247IPWR | ADS1247 |
| ADS62C17IRGCR | ADS62 |
| ADS8319IBDRCR | ADS8319 |
| ADS8319IBDGSR | ADS8319 |
| ADS8319IDGSR | ADS8319 |
Contact Person: Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753