company blog about ADSP-BF526KBCZ-4: [ADI] Low Power Blackfin Embedded Processor With Advanced Peripherals And Low Standby Power

ADSP-BF526KBCZ-4: [ADI] Low Power Blackfin Embedded Processor With Advanced Peripherals And Low Standby Power

ADSP-BF526KBCZ-4: The high performance 16/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality allow system designers a flexible platform to address a wide range of portable applications, including consumer, communications and industrial/instrumentation.

With the combination of peripherals which enable glue-less connectivity to networked devices such as Ethernet or WiFi 802.11 a/b/g modules and power efficient signal processing, the ADSP-BF526KBCZ-4 is well suited to IP connected applications such as VoIP Phone or IP Camera.

The VoIP challenge to the embedded-system designer is to choose a processing solution that is cost-effective, easy to deploy and scaleable in performance across market spaces. A “sweet spot” embedded-solution approach is to design with a platform that can implement a low channel count basic VoIP solution, yet retain sufficient capacity for value added capabilities and services – such as video, music, imaging and system control. Unlike traditional VoIP embedded solutions that utilize two processor cores to provide VoIP functionality, the ADSP-BF526KBCZ-4 provides a convergent solution in a unified core architecture that allows voice and video signal processing concurrent with RISC MCU processing to handle network and user-interface demands. This unique ability to offer full VoIP functionality on a single convergent processor provides for a unified software development environment, faster system debugging and deployment, and lower overall system cost.

IP protection has become a necessary part of today’s embedded computing applications. The ADSP-BF526 provides a security scheme which balances flexibility and upgradeability with performance through the inclusion of a firmware-based solution including OTP (One Time Programmable) memory to enable users to implement private keys for secure access to program code.

Specification Of ADSP-BF526KBCZ-4

Series: Blackfin®
Type: Fixed Point
Interface: DMA, Ethernet, I2C, PPI, SPI, SPORT, UART, USB
Clock Rate: 400MHz
Non-Volatile Memory: ROM (32kB)
On-Chip RAM: 132kB
Voltage - I/O: 1.8V, 2.5V, 3.3V
Voltage - Core: 1.30V
Operating Temperature: 0°C ~ 70°C (TA)
Mounting Type: Surface Mount
Package / Case: 289-LFBGA, CSPBGA
Supplier Device Package: 289-CSPBGA (12x12)

Features Of ADSP-BF526KBCZ-4

Lockbox™ Secure Technology: Hardware-enabled security for code and content protection.
Blackfin Processor Core with up to 400 MHz (800 MMACS) performance
2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels
12 peripheral DMA channels supporting one- and two-dimensional data transfers
NAND Flash Controller with 8-Bit interface for commands, addresses and data.
Ethernet 10/100 MII interface
Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM
Low Standby Power; ~1mA Deep Sleep, ~50uA Hibernate
289-ball, 12x12 mm, 0.5 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C)

Outline Dimensions Of ADSP-BF526KBCZ-4

ADSP-BF526KBCZ-4 processors are members of the Blackfin family of products, incorporating the Analog Devices/Intel Micro Signal Architecture (MSA). Blackfin® processors combine a dual-MAC state-of-the-art signal processing engine, the advantages of a clean, orthogonal RISC-like microprocessor instruction set, and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture.

ADSP-BF526KBCZ-4 processors are highly integrated system-on-achip solutions for the next generation of embedded network connected applications. By combining industry-standard interfaces with a high performance signal processing core, costeffective applications can be developed quickly, without the need for costly external components. The system peripherals include an IEEE-compliant 802.3 10/100 Ethernet MAC, a USB 2.0 high speed OTG controller, a TWI controller, a NAND flash controller, two UART ports, an SPI port, two serial ports (SPORTs), eight general purpose 32-bit timers with PWM capability, a core timer, a real-time clock, a watchdog timer, a Host DMA (HOSTDP) interface, and a parallel peripheral interface (PPI).

Company URL: https://www.integrated-ic.com/

FAQ
Q. Are your products original?
A: Yes, all products are original, new original import is our purpose.
Q:Which Certificates do you have?
A:We are ISO 9001:2015 Certified Company and member of ERAI.
Q:Can you support small quantity order or sample?Is the sample free?
A:Yes,we support sample order and small order.Sample cost is different according to your order or project.
Q:How to ship my order? Is it safe?
A:We use express to ship,such as DHL,Fedex,UPS,TNT,EMS.We can also use your suggested forwarder.Products will be in good packing and ensure the safety and we are responsible to product damage to your order.
Q:What about the lead time?
A:We can ship stock parts within 5 working days.If without stock,we will confirm lead time for you based on your order quantity.