AVR16EA28-E/STX [Microchip] Microcontroller MCU: 20MHz 8-Bit AVR EA Microcontroller IC With Hardware Multiplier
AVR16EA28-E/STX is a microcontroller in the AVR® EA family featuring the AVR® CPU with hardware multiplier, running at up to 20 MHz and with 16 KB Flash with dedicated Read-While-Write (RWW) section, 2 KB SRAM and 512B of EEPROM available in 28-pin SPDIP, SSOP, and VQFN packages. The family uses the latest Core Independent Peripherals with low-power features including Event System, intelligent analog and advanced peripherals.
The new 12-bit ADC offers true differential measuring capabilities with optional hardware accumulation of up to 1024 samples, which effectively gives up to 17-bits resolution. With sampling rates up to 375 ksps the analog data is available very rapidly. The Programmable Gain Amplifier (PGA) for the ADC can amplify single-ended and differential analog inputs to make it possible to measure even small amplitude signals efficiently.
Specification Of AVR16EA28-E/STX
Core Processor: AVR
Core Size: 8-Bit
Speed: 20MHz
Connectivity: I2C, IrDA, SMBus, SPI, UART/USART
Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
Number of I/O: 23
Program Memory Size: 16KB (16K x 8)
Program Memory Type: FLASH
EEPROM Size: 512 x 8
RAM Size: 2K x 8
Voltage - Supply (Vcc/Vdd): 1.8V ~ 5.5V
Data Converters: A/D 20x12b; D/A 1x10b
Oscillator Type: External, Internal
Operating Temperature: -40°C ~ 125°C (TA)
Mounting Type: Surface Mount
Supplier Device Package: 28-VQFN (4x4)
Package / Case: 28-VFQFN Exposed Pad
Product Features Of AVR16EA28-E/STX
• AVR® CPU
– Running at up to 20 MHz
– Single-cycle I/O register access
– Two-level interrupt controller
– Two-cycle hardware multiplier
– Supply voltage range: 1.8-5.5V
• Memories
– 16 KB In-system-programmable Flash memory with a true read-while-write operation
– 2 KB SRAM
– 512 EEPROM
– 64B of user row in nonvolatile memory that can keep data during chip-erase and be programmed while the device is locked
– Write/erase endurance
• Flash: 10,000 cycles
• EEPROM: 100,000 cycles
– Data retention: 40 Years at 55°C
• Peripherals
– Two 16-bit Timer/Counters type A (TCA) with three compare channels for PWM and waveform generation
– Four 16-bit Timer/Counters type B (TCB) with input capture for capture and signal measurements
– One 16-bit Real-Time Counter (RTC) that can run from an external crystal or internal oscillator
– Three USARTs with fractional baud rate generator, auto-baud, and start-of-frame detection
– One host/client Serial Peripheral Interface (SPI)
– One Two-Wire Interface (TWI) with dual address match
• Independent host and client operation (Dual mode)
• Philips I2C compatible
• Standard-mode (Sm, 100 kHz)
• Fast-mode (Fm, 400 kHz)
• Fast-mode Plus (Fm+, 1 MHz)
– Event System for CPU-independent and predictable inter-peripheral signaling
– Configurable Custom Logic (CCL) with up to four programmable Look-up Tables (LUTs)
– One 12-bit, 375 ksps, differential Analog-to-Digital Converter (ADC)
• Includes a Programmable Gain Amplifier (PGA), 1x to 16x gain on the input signal
– One 10-bit Digital-to-Analog Converter (DAC)
– Two Analog Comparators (ACs) with window compare functions
• Temperature Ranges
– Industrial: -40°C to 85°C ambient
– Extended: -40°C to 125°C ambient
AVR16EA28-E/STX - Pinout (28-pin VQFN)
The AVR16EA28-E/STX microcontrollers of the AVR® EA Family are using the AVR® CPU with hardware multiplier running at clock speeds up to 20 MHz. They come with 16 KB of Flash, 2 KB of SRAM, and 512 bytes of EEPROM. The microcontrollers are available in 28-, 32- and 48-pin packages. The AVR® EA Family uses the latest technologies from Microchip with a flexible and low-power architecture, including Event System, accurate analog subsystems, and advanced digital peripherals.
Company URL: https://www.integrated-ic.com/
FAQ
Q. Are your products original?
A: Yes, all products are original, new original import is our purpose.
Q:Which Certificates do you have?
A:We are ISO 9001:2015 Certified Company and member of ERAI.
Q:Can you support small quantity order or sample?Is the sample free?
A:Yes,we support sample order and small order.Sample cost is different according to your order or project.
Q:How to ship my order? Is it safe?
A:We use express to ship,such as DHL,Fedex,UPS,TNT,EMS.We can also use your suggested forwarder.Products will be in good packing and ensure the safety and we are responsible to product damage to your order.
Q:What about the lead time?
A:We can ship stock parts within 5 working days.If without stock,we will confirm lead time for you based on your order quantity.
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753