company blog about DLPLCRC964EVM Now Available: TI DLP® LightCrafter™ Evaluation Module Featuring Complete DLPC964 Reference Design

As a professional service provider with years of experience in the high-end electronic component supply chain, Shenzhen Mingjiada Electronics Co., Ltd. is pleased to announce the long-term availability of the Texas Instruments (TI) genuine DLPLCRC964EVM evaluation module.

Description

The DLP® LightCrafter™ DLPLCRC964EVM evaluation module (EVM) provides a reference design to accelerate development of the DLPC964 controller architecture supporting DLP991U and DLP991UUV DMD chips. This platform receives high-speed bitplane data from external sources via the AMD Aurora 64B/66B interface. After formatting the bitplane data, it loads it into the DLPLCR99EVM or DLPLCR99UVEVM, ultimately displaying it on the DLP991U or DLP991UUV DMD.

Features

• Controller EVM for DLPLCR99EVM and DLPLCR99UVEVM

• 12 HSS input Aurora 64B/66B data channels, 10Gbps per channel

• 32 HSS DMD output data channels, 3.6Gbps per channel

Applications

• Digital direct imaging (LDI)

• Maskless lithography

• Additive manufacturing and 3D printing

• Industrial printing

• Dynamic grayscale marking and coding

• High-speed imaging and display

DLP LightCrafter DLPC964 Evaluation Module

1 DLPLCRC964EVM Evaluation Module Overview

1.1 Introduction

The TI DLP DLPC964 graphical user interface supports evaluation of the DLPLCRC964EVM (DLPC964 controller board), DLPLCR99EVM (DLP991U DMD board), DLPLCR99UVEVM (DLP991UUV DMD board), and application FPGA (AMD EVM). The DLPC964EVM incorporates fixed test patterns that can be loaded onto the DLP991U or DLP991UUV DMD chip and provides the necessary interfaces to display these patterns on the supported DMD. The front-end AMD EVM connects to the DLPC964 controller, transmitting high-speed pattern data to the supported DMD EVM (DLPC99EVM or DLPC99UVEVM).

Note

The DLPLCRC964EVM (DMD EVM), DLPLCR99UVEVM (DMD EVM), AMD Xilinx™ Virtex™-7 evaluation board (application FPGA), optical components, light source, and power supply are not included in the DLPLCRC964EVM kit and must be purchased separately.

1.2 Kit Contents

The DLPLCRC964EVM is a flexible, ready-to-use evaluation module. When used with either the DLPLCR99EVM or DLPLCR99UVEVM (including the application FPGA board), the DLPLCRC964EVM enables the transmission of customer-defined patterns to the DLPC964 controller for display on the connected DLP991U or DLP991UUV DMD. The DLP LightCrafter DLPC964EVM and the corresponding DLP991U or DLP991UUV DMD EVM can be purchased separately, allowing customers to select the required components based on their application needs.

1.3 Specifications

The DLPLCRC964EVM incorporates an electronic module capable of controlling DLP991U DMDs. This evaluation board offers multiple interface options, including USB, I2C, HPC FMC connectors, and flexible cable interfaces. Figure 1-1 displays the hardware block diagram of the DLPLCRC964EVM.

Key components of the DLPLCRC964EVM include:

• DLPC964 digital DMD controller

• Power management unit supporting the DLPC964 subsystem

• DLPC964 configuration flash memory

• USB 2.0 interface

• Flexible cables—four required to support the DLP991U DMD evaluation board

• HPC FMC connectors—two sets for connecting application FPGAs or other front-end boards

Figure 1-1. DLP LightCrafter DLPC964 Evaluation Board Module Diagram

Contact Mingjiada Electronics immediately for the latest stock availability, documentation, and pricing information regarding the TI DLPLCRC964EVM evaluation module.

Contact: Mr. Chen

Phone: +86 13410018555

Email: chen13410018555@163.com / sales@hkmjd.com

Address: Room 1239-1241, Xin Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province