company blog about FTDI USB Controllers FT600Q-B-T USB 3.0 To FIFO Interface Bridge Chip

FTDI USB Controllers FT600Q-B-T USB 3.0 To FIFO Interface Bridge Chip

Product Description Of FT600Q-B-T

FT600Q-B-T is a high performance USB 3.0-to-FIFO interface bridge chip. This device can be used in those applications which require high data throughput such as imaging devices and Multi-Channel FIFO ADC or DAC devices etc.

The FIFO interface can support multi-voltage I/O (1.8V, 2.5V, 3.3V) and operating frequencies of 66.67MHz or 100MHz. 100MHz only for 2.5V and 3.3V.

Specifications Of FT600Q-B-T

Product: USB Controllers

Type: Bridge, USB to FIFO

Package/Case: QFN-56

Standard: USB 3.0

Speed: Super Speed (SS)

Data Rate: 5 Gb/s

Supply Voltage - Min: 3 V

Supply Voltage - Max: 3.3 V

Operating Supply Current: 65 mA

Minimum Operating Temperature: - 40 C

Maximum Operating Temperature: + 85 C

Moisture Sensitive: Yes

Unit Weight: 234 mg

Features Of FT600Q-B-T

Supports USB 3.0 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps)/USB 2.0 Full Speed (12Mbps) transfer.

Supported USB Transfer Type: Control/Bulk/Interrupt

Up to 8 configurable endpoints (PIPEs).

Supports 2 parallel slave FIFO bus protocols 245 and FIFO mode, FT601 with 32 bit parallel interface has a data bursting rate up to 400MB/s.

Supports 4 IN channels and 4 OUT channels on FIFO bus connectivity.

Built-in 16kB FIFO data buffer RAM.

Supports Remote Wakeup capability.

Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.

Configurable GPIO support.

Internal LDO 1.0V regulator.

Integrated power-on-reset circuit.

User programmable USB descriptors.

Supports Battery Charging spec.BC1.2 battery charging detection.

Available as FT600-16bit/FT601-32bit FIFO interface.

Industrial operating temperature range: -40 to 85⁰C.

Applications Of FT600Q-B-T

Upgrading Legacy Peripherals to USB

Utilising USB to add system modularity

Interfacing PLD/FPGA based designs to USB 3.0

USB 3.0 data acquisition

USB 3.0 Digital Video Camera Interface

USB 3.0 Digital Camera

USB 3.0 Interface for Printer/Scanner

Medical/Industrial imaging devices

USB 3.0 Instrumentation

Block Diagram Of FT600Q-B-T