GD25Q128EYIG SPI NOR Flash Memory: The Ideal Storage Solution for Consumer Electronics, IoT, and Industrial Control Applications—Shenzhen Mingjiada Electronics Specializes in Supply and Recycling
GD25Q128EYIG Product Overview
The GD25Q128EYIG is a 128M-bit (16MB) serial NOR Flash memory chip launched by GigaDevice, part of the GD25Q128E series. The chip uses a WSON-8 package (6x8 mm) and supports standard SPI, dual SPI, and quad SPI interfaces, with a maximum clock frequency of 133 MHz and a quad-channel data transfer rate of up to 532 Mbps.
As an industrial-grade memory chip, the GD25Q128EYIG operates within a temperature range of -40°C to +85°C, making it suitable for embedded applications in various harsh environments.
GD25Q128EYIG Key Features
Memory Architecture and Performance
Storage Capacity: 128Mbit (16MB), page size 256 bytes, sector size 4KB, block size 64KB, total of 256 blocks
High-Speed Interface: Supports standard SPI, Dual SPI, and Quad SPI modes, with a peak data transfer rate of up to 532 Mbit/s in Quad SPI mode
Access Speed: Access time as low as 7 ns, supporting high-speed code execution
Flexible Erase/Programming: Supports 4 KB sector erase, 32 KB/64 KB block erase, and whole-chip erase
Power Consumption and Reliability
Low-Power Design: Typical standby current of 14 µA; only 1 µA in deep power-down mode, making it suitable for battery-powered devices
High Endurance: Supports ≥100,000 program/erase cycles; data retention for 20 years
Security Features: Built-in 128-bit unique ID, 3×1024-byte OTP security register, software/hardware write protection, and top/bottom block protection
Operating Conditions
Supply Voltage: 2.7 V to 3.6 V, single-supply operation
Package: WSON-8 (6×8 mm), surface-mount, suitable for space-constrained designs
GD25Q128EYIG Typical Applications
1. Consumer Electronics
Code storage and fast boot for smart TVs, set-top boxes, and smart speakers
Firmware storage for digital cameras and portable media players
Configuration parameter storage for game consoles and smart home devices
2. Internet of Things (IoT) Devices
Data caching for smart sensor nodes and smart meters
Firmware and user data storage for wearable devices (smartwatches, fitness trackers)
Code execution and OTA update support for low-power IoT end devices
3. Industrial Control
Program storage for PLCs and industrial automation controllers
Configuration data for Human-Machine Interface (HMI) devices
Firmware storage for industrial fieldbus modules
4. In-Vehicle Electronics
Boot code storage for in-vehicle infotainment systems
Firmware and configuration storage for dashcams and navigation modules
5. Communications and Networking Equipment
Firmware storage for routers and switches
Configuration parameter storage for 5G base stations and communication modules
Why Choose the GD25Q128EYIG
Advantages of Domestic Substitution: GigaDevice is a leading global NOR Flash manufacturer. The GD25Q128E series offers strong compatibility and can directly replace overseas models with the same specifications, reducing supply chain risks.
Execute-in-Place (XIP) Support: Supports Execute-in-Place (XIP), allowing programs to run directly from Flash without loading into RAM, thereby improving system boot speed and real-time responsiveness.
Small Package, High Integration: The compact WSON-8 package saves PCB space and is suitable for high-density integration designs.
Shenzhen Mingjiada Electronics — Professional Supply and Recycling
Shenzhen Mingjiada Electronics Co., Ltd. is a well-known distributor of electronic components, specializing in various semiconductor devices such as memory ICs, microcontrollers, communication ICs, and automotive-grade ICs. We have established close partnerships with world-renowned original manufacturers to ensure that components are sourced legitimately and are of reliable quality.
We offer:
Genuine GD25Q128EYIG in stock, WSON-8 package, with guaranteed delivery times
Professional recycling services: We consistently recycle GD25Q128EYIG and other models of NOR Flash, MCUs, memory ICs, and more, helping businesses manage excess inventory
Nationwide service: Headquartered in Shenzhen, serving the entire country
Contact: Mr. Chen
Phone: +86 13410018555
Email: sales@hkmjd.com
Address: Rooms 1239–1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753