company blog about Infineon EVAL-M3-IM564 and EVAL-M7-D111T iMOTION™ Modular Application Design Evaluation Boards

Infineon EVAL-M3-IM564 and EVAL-M7-D111T iMOTION™ Modular Application Design Evaluation Boards

Shenzhen Mingjiada Electronics Co., Ltd. supplies Infineon EVAL-M3-IM564 and EVAL-M7-D111T iMOTION™ Modular Application Design Evaluation Boards.

EVAL-M3-IM564—Infineon's motor drive evaluation board, designed around the CIPOS™ Mini intelligent power module (IPM), integrates power factor correction (PFC) and three-phase inverter functionality for industrial and home appliance motor control applications.

【Core Parameters】

Input voltage range: 160VAC to 265VAC

Motor power output: 2800W

Maximum rated voltage: 600V

Current capability: 20A

Dimensions: 148mm × 165mm (dual-layer PCB, 35μm copper thickness)

Interface: 30-pin M3 connector (compatible with iMOTION™ MADK control boards)

【Key Features】

Integrated PFC: Utilises CoolMOS™ P7 MOSFETs and Rapid diodes, supporting 50kHz high-frequency switching to reduce inductor size.

Three-phase inverter: Six IGBTs and reverse diodes supporting sensorless field-oriented control (FOC).

Protection mechanisms: Overcurrent and overtemperature hardware protection, DC-link voltage detection, thermistor output.

Auxiliary power supply: 15V and 3.3V outputs.

【Application Scenarios】

Industrial drives: Compressors, motor control systems. ‌

Home Appliances: Large equipment such as air conditioners. ‌

Evaluation Purpose: Requires pairing with EVAL-M3-102T control board for complete motor drive testing. ‌

【Design Features】

High Integration: Single board integrates PFC and inverter functions, simplifying system design. ‌

Thermal Optimisation: DCB substrate and forced air cooling design support 2.8kW continuous load. ‌

RoHS compliant. ‌

EVAL-M7-D111T——Infineon's iMOTION™ series motor control development board, specifically designed for sensorless Field-Oriented Control (FOC), supports PMSM/BLDC motor control, suitable for laboratory evaluation and prototype development.

【Core Features】

Control Chip: Incorporates the IMD111T-6F040 driver with integrated Motion Control Engine (MCE), enabling sensorless FOC control for motor operation without programming.

Power Parameters: Input voltage 15V, output voltage 5V, maximum operating temperature 50°C.

Interfaces: Provides UART and USB debug interfaces, supporting galvanically isolated debugging.

【Application Scenarios】

Motor Control: Suitable for scenarios requiring efficient motor drives, such as power tools, compressors, and air conditioning systems.

Development Tools: When paired with iMOTION MADK power boards (e.g., M7 interface series), enables construction of three-phase inverter solutions across varying voltage/power configurations. ‌

【Safety and Precautions】

High-voltage hazard: On-board DC bus capacitors require a 5-minute discharge period after power-off. Use high-voltage differential probes during operation. ‌

Intended users: Laboratory technicians with expertise in motor control and power electronics only. ‌

【Product Specifications】

Dimensions: 77mm × 51mm × 14mm

Current output: 20mA/60mA

【Available Infineon Evaluation Boards】

TLE4973-EVAL-VER-BAR

DEMO-BGT24ATR22-YPA

DEMO-BGT24ATR22-DPA

TLE4973-EVAL-120A

SHIELDXENSIVA

TLE4973-EVAL-STD-PCB

TLE4972-EVAL-INLAY

TLE4973-EVAL-INLAY

SHIELD-PASCO2-SENSOR

EVAL-MICROIAS

TLE4973-MS2GO

DEMO-BGT60TR13C

TLE4972-EVAL-LAT-BAR

TLE4972-EVAL-VER-BAR

EVAL-CO2-5V-MINIBOARD

TLE4972-EVAL-STD-PCB

SHIELD-60ATR24ES-01

S2GO-RADAR-BGT60LTR11

TLE4966-MS2GO

DEMO-BGT60LTR11AIP

EVAL-PASCO2-MINIBOARD

KIT-CSK-PASCO2

TLV493D-A1B6-MS2GO

S2GO-3D-TLE493DW2B6-A0

S2GO-2-HALL-TLE4966K

S2GO-HALL-TLE4964-3M

CUR-SENSOR-PROGRAMMER

TLE493D-W2B6-MS2GO

TLE4971-MS2GO

TLE4999X-PROGRAM-KIT