company blog about LIFCL-40-8MG289C: Lattice CrossLink-NX™ Series Low-Power FPGA (Field-Programmable Gate Array)

LIFCL-40-8MG289C: Lattice CrossLink-NX™ Series Low-Power FPGA (Field-Programmable Gate Array)

Shenzhen Mingjiada Electronics Co., Ltd. – Long-term supplier and recycler of Lattice CrossLink-NX™ series FPGAs: LIFCL-40-8MG289C. This device is an FPGA designed for embedded vision processing, enabling MIPI bridging and edge AI.

I. LIFCL-40-8MG289C Product Overview
The LIFCL-40-8MG289C is a high-performance, low-power FPGA from Lattice Semiconductor’s CrossLink-NX™ series, specifically optimised for embedded vision processing, MIPI bridging, edge AI inference, sensor aggregation and high-speed interface conversion.

Built on the Lattice Nexus™ FPGA platform and utilising the advanced 28 nm FD-SOI (Fully Depleted Silicon-On-Insulator, Fully Depleted Silicon-On-Insulator) process, seamlessly combining the exceptional flexibility of an FPGA with the low-power, high-reliability benefits of FD-SOI technology (extremely low soft error rate, SER), making it one of the most competitive low-power FPGA solutions on the market today.

The LIFCL-40-8MG289C is housed in a 289-CSBGA (9.5×9.5 mm) package, providing 180 user I/Os and boasting a rich resource of 39,000 logic cells. It supports an operating temperature range of 0°C to 85°C, with a core supply voltage of 0.95 V to 1.05 V, making it an embedded programmable logic device that strikes a balance between performance and power consumption.

The LIFCL-40-8MG289C features integrated hard-core MIPI D-PHY (2.5 Gbps per channel), 5 Gbps PCIe Gen2, 1.5 Gbps programmable I/O and a 1066 Mbps DDR3 controller. It supports a variety of high-speed interface protocols, including MIPI D-PHY (CSI-2 and DSI), LVDS, subLVDS, SLVS, OpenLDI (OLDI) and SGMII (Gigabit Ethernet), making it particularly suitable for application systems requiring high data throughput and real-time image processing.

II. Detailed Specifications for the LIFCL-40-8MG289C
Precise specifications form the cornerstone of hardware selection. The LIFCL-40-8MG289C offers well-balanced and comprehensive hardware specifications, making it suitable for lightweight, programmable development across a wide range of scenarios. The key specifications are as follows:
- Series Model: CrossLink-NX™ LIFCL-40 Series LIFCL-40-8MG289C
- Process Technology: 28nm FD-SOI programmable process
- Logic Resources: 39,000 Logic Elements (LE), 9,750 Adaptive Logic Modules (ALM)
- Memory Resources: Total RAM capacity of 1,548,288 bits (1.48 Mbit), with an exceptionally high logic-to-memory ratio to support lightweight AI inference operations
- I/O Configuration: 180 programmable I/O ports, including 37 sets of programmable synchronous I/O pairs, suitable for interfacing with high-speed camera and display interfaces
- High-Speed Interfaces: Two integrated, hardwired 4-channel MIPI D-PHY transceivers, with a single-channel data rate of 2.5 Gbps and a maximum transmission rate of 10 Gbps per PHY; Supports 5Gbps PCIe interfaces and 1.5Gbps differential I/O transmission
- Supply voltage: 0.95V to 1.05V; ultra-low operating voltage significantly reduces static power consumption
- Configuration speed: I/O port configuration takes just 3ms; the chip completes system-wide boot configuration in as little as 8ms, enabling millisecond-level rapid power-up
- Operating temperature: Commercial-grade standard 0°C to 85°C, suitable for standard consumer and commercial equipment applications
- Package type: MG289 (289-pin CSFBGA), surface-mount type, compatible with precision PCB assembly processes
- Reliability parameters: Soft error rate (SER) improved by a factor of 100 compared to competitors, with exceptional interference resistance

III. Key Features of the LIFCL-40-8MG289C
1. Ultra-low power consumption, ideal for portable embedded applications
Leveraging a dedicated 28nm FD-SOI process and programmable reverse bias technology, the LIFCL-40-8MG289C can flexibly optimise performance and power consumption to suit specific device operating scenarios, dynamically adjusting the chip’s operating state. Compared to traditional FPGAs of the same specification, overall power consumption is significantly reduced. The ultra-low supply voltage design effectively minimises heat dissipation losses, making it perfectly suited for battery-powered portable smart devices, wireless sensor terminals and other products with stringent low-power requirements.
2. Ultra-fast power-up configuration for higher device boot efficiency
The LIFCL-40-8MG289C incorporates Lattice’s proprietary ultra-fast configuration technology, overcoming the high boot-up latency typically associated with traditional FPGAs. I/O ports are configured in just 3 ms, with the entire system completing initialisation in as little as 8 ms. This supports rapid device wake-up and instant boot-up, making it suitable for scenarios with stringent boot-up speed requirements, such as industrial real-time control, in-vehicle imaging and high-speed sensor data acquisition.
3. Extensive High-Speed Interfaces, Exceptional Compatibility
As an FPGA dedicated to embedded imaging, the LIFCL-40-8MG289C integrates dual hardwired MIPI D-PHY transceivers, offering full compatibility with mainstream imaging interfaces such as MIPI CSI-2 and MIPI-DSI, enabling simultaneous connection to multiple cameras and high-definition display modules. Combined with general-purpose high-speed interfaces such as PCIe and high-speed differential I/O, it enables cross-device and cross-protocol data bridging and signal conversion, supporting the expansion of various peripheral devices.
4. Exceptional Stability and Security, Suitable for Harsh Operating Conditions
The LIFCL-40-8MG289C boasts excellent resistance to radiation and interference, with a soft error rate significantly lower than that of comparable industry products, enabling long-term stable operation in industrial and automotive environments characterised by complex electromagnetic interference. It also incorporates security mechanisms such as bitstream encryption and password protection, effectively safeguarding user-developed programmes, preventing data tampering and programme theft, and ensuring both operational security and the protection of intellectual property.
5. Compact and Highly Integrated, Reducing Hardware Design Costs
The compact 9.5×9.5mm package, combined with highly integrated hardware resources, eliminates the need for external transceivers or memory chips. This significantly reduces PCB design space, lowers procurement and layout costs for peripheral components, and facilitates the miniaturisation and lightweighting of equipment through iterative upgrades.

Mingjiada Electronics: LIFCL-40-8MG289C Professional Supply and Recycling Services
Mingjiada Electronics has long specialised in the full range of Lattice FPGA products, offering a one-stop service for the LIFCL-40-8MG289C, including brand-new, genuine stock supply, bulk order fulfilment, technical consultation and the recycling of surplus chips.

If you require genuine LIFCL-40-8MG289C chips or wish to dispose of related inventory, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further details on supply and demand.