company blog about Maxim MAX1483ESA 20µA Slew-Rate-Limited RS-485 Transceivers

Maxim MAX1483ESA 20µA Slew-Rate-Limited RS-485 Transceivers

Shenzhen Mingjiada Electronics Co., Ltd, as a global well-known electronic components distributor, supplies Maxim MAX1483ESA low-power RS-485/RS-422 transceiver chip from stock. This MAX1483ESA device is designed for industrial control, communication networks and other applications, with 20µA ultra-low operating current and swing limit characteristics, can effectively reduce EMI and signal reflection problems.

Product Description Of MAX1483ESA
MAX1483ESA is low-power transceivers for RS-485 communication. MAX1483ESA feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables. Data rates are guaranteed up to 250kbps.

MAX1483ESA draw only 20µA of supply current. Additionally, they have a low-current shutdown mode that consumes only 0.1µA.The parts operate from a single +5V supply.

MAX1483ESA Drivers is short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The MAX1483ESA receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

MAX1483ESA is half duplex, have a 1/8-unit-load input impedance that guarantees up to 256 transceivers on the bus.

Specification Of MAX1483ESA
Protocol：RS422, RS485
Number of Drivers/Receivers：1/1
Duplex：Half
Receiver Hysteresis：75 mV
Data Rate：250kbps
Voltage - Supply：4.75V ~ 5.25V
Operating Temperature：-40°C ~ 85°C

Features Of MAX1483ESA
Low 20µA Operating Current
Slew-Rate Limited for Reduced EMI and Reduced Reflections
0.1µA Low-Current Shutdown Mode
Designed for RS-485 and RS-422 Applications
Operate from a Single +5V Supply
-7V to +12V Common-Mode Input Voltage Range
Allows up to 256 Transceivers on the Bus—Guaranteed (1/8-unit load)
Current Limiting and Thermal Shutdown for Driver Overload Protection

Core Benefits Of MAX1483ESA
Ultra-low power design: The MAX1483ESA operates at only 20µA and 0.1µA in shutdown mode, making it ideal for battery-powered devices.

Swing-limiting driver: The MAX1483ESA has a built-in swing-limiting circuit, which effectively reduces EMI and signal reflection caused by improper cable termination.

Wide operating voltage range: The MAX1483ESA supports a common mode input voltage range of -7V to +12V, providing high immunity to interference.

High node capacity: 1/8 unit load input impedance, MAX1483ESA supports up to 256 transceivers on a single bus.

Complete protection: MAX1483ESA has short-circuit current limit and thermal shutdown protection, the driver output will automatically enter the high-resistance state when overheating.

Applications Of MAX1483ESA
Industrial Control Local Area Networks
Large 256-Node LANs
Low-Power RS-485/RS-422 Networks
Transceivers for EMI-Sensitive Applications

Product Images Of MAX1483ESA