company blog about Mingjiada Electroncis Supply Espressif BT Modules, Wi-Fi MCU Modules And Wi-Fi 6 Modules

Mingjiada Electroncis Supply Espressif BT Modules, Wi-Fi MCU Modules And Wi-Fi 6 Modules

Shenzhen Mingjiada Electronics Co., Ltd. – Long-term supplier of Espressif Wi-Fi 6 and Bluetooth modules, Wi-Fi MCU modules, and Wi-Fi+BT dual-mode MCU module series. Our products are widely applied across various high-tech sectors, including smart home, industrial automation, consumer electronics, medical devices and network communications, providing comprehensive wireless connectivity solutions for IoT devices in diverse scenarios.

I. BT Module Series
For short-range wireless communication requirements, Espressif’s BT modules support multiple protocols, including Classic BT and BT Low Energy (BLE).
ESP32-H2 Series: Models include the ESP32-H2-MINI and ESP32-H2-WROOM. This series features a RISC-V 32-bit single-core processor with a clock speed of up to 96 MHz and 256 KB of on-board SRAM. It supports the Bluetooth 5.3 protocol and the IEEE 802.15.4 (Thread/Zigbee) standard, making it suitable for low-power applications such as smart lighting, wearable devices and sensor networks.

II. Wi-Fi MCU Module Series
A low-cost, highly integrated module series designed specifically for lightweight Wi-Fi connectivity, providing a cost-effective wireless solution for entry-level IoT applications.
ESP32-S2 Series: Models include the ESP32-S2-MINI and ESP32-S2-SOLO. This series is equipped with an Xtensa single-core LX7 processor, operating at up to 240 MHz, and supports Wi-Fi HT40 and up to 43 GPIO pins. It also supports a wide range of peripherals, including USB OTG and capacitive touch interfaces, making it suitable for applications such as smart home appliances and security cameras.

III. Wi-Fi 6 Module Series
Wi-Fi 6 (802.11ax) technology, with its high throughput, low latency and ability to support simultaneous connections for multiple devices, has become the preferred wireless solution for the next generation of IoT devices.
The Wi-Fi 6 modules supplied by Mingjiada Electronics include:
ESP32-C6 Series: Models include the ESP32-C6-MINI and ESP32-C6-WROOM. This series supports dual-band 2.4GHz and 5GHz Wi-Fi 6, as well as BT 5.0 (LE). It is equipped with a RISC-V 32-bit single-core processor operating at 160 MHz, with a deep sleep current consumption of less than 5μA.
ESP32-C61 Series: As a complement to the C6 series, the ESP32-C61 series includes models such as the ESP32-C61-MINI-1, ESP32-C61-MINI-1U and ESP32-C61-WROOM-1U. All three products support 2.4 GHz Wi-Fi 6 (802.11ax) and BT 5 (LE), and are equipped with a 32-bit single-core RISC-V processor with a maximum clock speed of 160 MHz, as well as 320 KB of SRAM and 256 KB of ROM.
ESP32-C5 Series: Espressif’s first chip to support dual-band 2.4 GHz and 5 GHz Wi-Fi 6, featuring a 32-bit single-core RISC-V processor with a clock speed of up to 240 MHz, 384 KB of SRAM, 320 KB of ROM, and 29 programmable GPIO pins.

IV. Wi-Fi + BT Dual-Mode MCU Module Series
As Espressif’s flagship product line, the dual-mode series integrates Wi-Fi and BT functionality, providing full-stack IoT development support.
ESP32 Series: A classic flagship product series, including models such as the ESP32-WROOM-32 and ESP32-WROVER-E. Equipped with a dual-core Xtensa LX6 processor (240 MHz), it supports Wi-Fi 4 (802.11 b/g/n) and BT 4.2 (BR/EDR+BLE), and offers a rich array of peripheral interfaces including SPI, I2C and ADC, making it suitable for complex scenarios such as industrial control and voice assistants.
ESP32-S3 Series: A high-performance flagship series designed for mid-to-high-end AIoT devices, including models such as the ESP32-S3-WROOM and ESP32-S3-MINI. It utilises an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz, supports Wi-Fi 4 and BT 5 (LE), and features built-in vector instructions to accelerate neural network computing and signal processing. It is equipped with 512 KB of SRAM and 384 KB of ROM, and supports external Flash and PSRAM expansion.
ESP32-C3 Series: Models include the ESP32-C3-WROOM and ESP32-C3-MINI. Featuring a RISC-V single-core processor architecture with a clock speed of 160 MHz, it supports Wi-Fi 4 and BLE 5.0, as well as secure boot and hardware encryption. As an upgraded replacement for the ESP8266, it is suitable for the development of cost-sensitive devices.
ESP32-C2 Series: A cost-effective, ultra-low-power MCU launched by Espressif, utilising a 4mm × 4mm QFN package. It features a proprietary RISC-V 32-bit single-core processor, 272 KB of on-board SRAM, and integrated 2.4 GHz Wi-Fi and BT LE dual-mode wireless connectivity. It is suitable for lightweight embedded applications such as lighting equipment, sensors and simple household appliances.

Mingjiada Electronics offers a comprehensive product supply service covering the full range of Espressif products, from the entry-level ESP8266 to the high-performance ESP32-S3, and the next-generation Wi-Fi 6 ESP32-C5/C6/C61. For detailed product specifications, sample enquiries or procurement solutions, please contact the Mingjiada Electronics team.
Company URL: https://www.integrated-ic.com/