Mingjiada Electronics (Shenzhen) is currently seeking long-term global suppliers for Qorvo’s CMD240C4 broadband GaAs MMIC distributed amplifier. The CMD240C4 is a high-performance RF amplifier developed by Qorvo. It features a leadless 4×4 mm surface-mount package (QFN-24) and operates over a frequency range from DC to 22 GHz, making it widely applicable in high-end fields such as radar, satellite communications, electronic countermeasures, and test and measurement.
This device features a 50-ohm matched design, eliminating the need for external RF port matching, which greatly simplifies RF front-end circuit design and shortens product development cycles.
As a professional electronic component supplier in the Shenzhen area, Mingjiada Electronics is seeking to purchase large quantities of CMD240C4 on a long-term basis. We are open to discussions regarding new, spot, or stock items, and welcome suppliers with available inventory to contact us for collaboration.
Specifications
The main technical specifications of the CMD240C4 are as follows:
Operating Frequency: 0 Hz to 22 GHz
Operating Supply Voltage: 5 V to 8 V
Operating Supply Current: 80 mA
Gain: 15 dB
NF—Noise Figure: 2 dB
Type: General Purpose Amplifiers
Mounting Style: SMD/SMT
Technology: Si
P1dB - Compression Point: 19 dBm
OIP3 - Third-Order Intercept Point: 27 dBm
Minimum Operating Temperature: -40 °C
Maximum Operating Temperature: +85 °C
Package and Environmental Information:
Package Type: Ceramic QFN, 4.0 × 4.0 mm
Mounting Type: Surface Mount (SMD/SMT)
RoHS Compliant, Lead-Free
ECCN: EAR99
Moisture Sensitivity Level: MSL 1
Key Features
The CMD240C4 is an ideal choice for broadband RF amplification applications thanks to the following outstanding features:
1. Ultra-wideband Performance
With a frequency range spanning DC to 22 GHz, a single device can meet the needs of various applications from the baseband to the microwave band, greatly simplifying bill of materials management and circuit design.
2. Low Noise Figure
With a typical noise figure of just 2 dB, it maintains excellent signal quality even at 10 GHz, making it ideal for receive chains with stringent signal-to-noise ratio requirements.
3. High Linearity
The output 1 dB compression point reaches +19 dBm (at 10 GHz), Psat reaches 22 dBm, and output IP3 reaches 27 dBm, ensuring good linearity even under high-signal-level conditions.
4. Low Current Consumption
Typical operating current is only 80 mA (with a 5 V to 8 V supply), resulting in low power consumption, which facilitates system thermal design and energy efficiency optimization.
5. 50-Ohm Impedance Matching
Internal 50-ohm impedance matching is provided, eliminating the need for external RF port matching components. This significantly simplifies the peripheral circuitry and reduces BOM costs and PCB area.
6. Excellent Return Loss
Input return loss of 15 dB and output return loss of 13 dB ensure signal transmission efficiency and system stability.
Typical Applications
Thanks to its combined advantages of ultra-wideband, low noise, and high linearity, the CMD240C4 is widely used in the following fields:
Electronic Countermeasures (EW): For signal detection, jamming, and countermeasure equipment in electronic warfare systems
Radar Systems: Suitable for signal amplification and processing chains in various radar front-ends
Space Technology: Meets the stringent performance requirements of aerospace-grade applications
Satellite Communications (Satcom): Used in the RF front-ends of satellite ground stations and on-board communication equipment
Test and Measurement: Widely used in test instruments such as spectrum analyzers and network analyzers
Communication Equipment: Used for signal amplification in various high-frequency communication systems
Purchase Inquiry
Mingjiada Electronics (Shenzhen) Co., Ltd. is currently seeking long-term global suppliers for Qorvo CMD240C4 RF amplifiers. Specific requirements are as follows:
Model: CMD240C4 (Qorvo)
Quantity: Large volumes on a long-term basis; stock on hand preferred
Packaging Requirements: Both tape-and-reel (TR) and cut-to-length (CT) are acceptable
Quality Requirements: Brand-new, original, and sourced through official channels
Delivery Method: Delivery to Shenzhen; on-site pickup available
We welcome distributors, traders, and manufacturers with inventory to contact us by phone or email to discuss business opportunities. Volume discounts available; cash transactions; integrity is our foundation.
Contact Us:
Phone: 86-13410018555
Email: sales@hkmjd.com
Address: Room 1239, Building B, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province
Your message must be between 20-3,000 characters!
English
