company blog about Mingjiada Electronics Supply And Recycle Lattice LIFCL-40-8MG289I CrossLink-NX™ FPGA IC

Mingjiada Electronics Supply And Recycle Lattice LIFCL-40-8MG289I CrossLink-NX™ FPGA IC

Mingjiada Electronics Core Supply and Recycling Product — Lattice LIFCL-40-8MG289I CrossLink-NX™ Field-Programmable Gate Array (FPGA) IC
CrossLink-NX: FPGAs for embedded vision processing, enabling MIPI bridging and edge AI

LIFCL-40-8MG289I Lattice CrossLink-NX™ FPGA Chip Detailed Specifications
The LIFCL-40-8MG289I is a low-power, embedded vision-specific FPGA developed by Lattice on its 28nm FD-SOI Nexus platform. It features MIPI bridging, high-speed interface transmission, and edge AI inference capabilities. Housed in an industrial-grade CSBGA-289 package, it is suited for demanding environments such as automotive, industrial, and medical applications. This high-reliability embedded solution strikes a balance between performance and power consumption, serving as a core component for such systems. It is also one of the popular models prioritised for supply and professional recycling by Mingjiada Electronics.

Key Technical Specifications
- Process Technology: 28nm FD-SOI (Fully Depleted Silicon-on-Insulator) process. Compared to conventional processes, it significantly reduces power consumption while enhancing the device's low soft error rate (SER), improving reliability by 100 times. This makes it the preferred process for low-power applications.
- Platform Advantages: Based on the Lattice Nexus platform, the LIFCL-40-8MG289I consumes 75% less power than comparable FPGA products, making it ideally suited for battery-powered embedded devices;
- Logic Resources: The LIFCL-40-8MG289I incorporates 39,000 logic cells (LC) and 9,750 adaptive logic modules (ALM), complemented by 56 18×18 hardware multipliers, enabling efficient support for digital signal processing and AI inference operations;
- Memory Resources: Total embedded RAM reaches 1,548,288 bits (approximately 1.55 Mb), comprising EBR (84 KB) and LRAM. Each logic cell corresponds to 170 bits of storage capacity, featuring a high memory-to-logic ratio design specifically tailored for data caching requirements in edge AI inference scenarios;
- Power Specifications: The LIFCL-40-8MG289I core operates at 0.95V to 1.05V, while its I/O interfaces support multiple voltage levels including 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. This robust compatibility enables flexible adaptation to diverse peripheral components.

The high-speed interface performance of the LIFCL-40-8MG289I constitutes its core advantage and represents a key consideration for Mingjiada Electronics' customers during procurement. Specific parameters are as follows:
- MIPI D-PHY (Hard Core): The LIFCL-40-8MG289I incorporates two sets of 4-channel MIPI D-PHY hard cores, achieving a single-channel rate of up to 2.5Gbps. Each set delivers a total bandwidth of 10Gbps, providing full support for CSI-2 (camera) and DSI (display) interface protocols. This enables multi-camera data aggregation and display bridging;
- PCIe Gen2 x1: An integrated PCIe Gen2 x1 hardware core interface operates at 5Gbps, enabling high-speed data transfer and catering to scenarios requiring rapid communication with the host system;
- Memory Interface: LIFCL-40-8MG289I supports DDR3/DDR3L/LPDDR2/LPDDR3 memory chips with a maximum speed of 1066Mbps and 16-bit data width, meeting high-speed data caching and read/write requirements;
- General-purpose I/O: The CSBGA-289 package provides 180 programmable I/O pins, including 37 pairs of source-synchronous I/O pairs. It supports multiple interface standards such as LVDS, subLVDS, OpenLDI, and SGMII (Gigabit Ethernet), with single-ended I/O rates up to 1.5Gbps, offering exceptional interface scalability.

LIFCL-40-8MG289I, leveraging its low power consumption, high-speed interfaces, and high reliability, combined with Mingjiada Electronics' supply and recycling services, finds extensive application across multiple sectors. Core application scenarios include:
- Industrial Vision: Machine vision cameras, AOI inspection equipment, vision-guided robots. Utilising MIPI sensor bridging and real-time image processing capabilities to enhance industrial inspection efficiency and precision;
- Automotive electronics: Surround-view imaging systems, driver monitoring systems, and in-vehicle display bridging. Industrial-grade wide-temperature and high-reliability designs adapt to harsh automotive environments, with select models supporting AEC-Q100 certification;
- Consumer electronics: Multi-camera smartphones/tablets, AR/VR devices, and smart display terminals. MIPI interface expansion and video processing capabilities enhance visual experiences for end devices;
- Medical equipment: Endoscopes, ultrasound imaging devices. Low-power, high-reliability characteristics meet medical equipment requirements for precise transmission and long-term stable operation;
- IoT edge computing: Sensor data aggregation gateways, local AI inference devices. Low-power design adapts to battery power supply; high storage-to-logic ratio supports lightweight AI tasks, enabling real-time edge data processing.

The Lattice LIFCL-40-8MG289I CrossLink-NX™ FPGA IC, leveraging core advantages of 28nm FD-SOI process technology, low power consumption, high-speed interfaces, and high reliability, serves as a pivotal component in embedded vision, edge AI, and automotive electronics. Its industrial-grade design and flexible configuration capabilities address diverse application requirements across various scenarios.

Mingjiada Electronics maintains long-term supply and recycling services for the Lattice LIFCL-40-8MG289I CrossLink-NX™ FPGA IC. For further product information, sample procurement, or recycling price enquiries regarding the LIFCL-40-8MG289I, please visit Mingjiada Electronics' official website (https://www.integrated-ic.com/) for comprehensive supply and demand details.