company blog about Mingjiada Electronics Supply TI THS4532PWEVM Evaluation Module, Supply THS4532 Fully Differential Amplifier

Mingjiada Electronics Supply TI THS4532PWEVM Evaluation Module, Supply THS4532 Fully Differential Amplifier

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supply of the TI THS4532PWEVM (Evaluation Module), suitable for evaluating the functionality of the THS4532 fully differential amplifier. Product details for the THS4532PWEVM are as follows:

THS4532PWEVM is an evaluation module for the dual-channel THS4532 (PW package, 16-pin TSSOP), designed to demonstrate the amplifier's functionality and flexibility quickly and conveniently.

THS4532PWEVM Product Information:
Number of Channels per IC: 2 - Dual
Amplifier Type: Differential
Output Type: Differential, Full Swing
Slew Rate: 390 V/µs
-3dB Bandwidth: 36 MHz
Gain-Bandwidth Product: 27 MHz
Current - Output/Channel: 25 mA
Current - Supply (Main IC): 250µA
Voltage - Supply, Single/Dual (±): 2.5V to 5.5V, ±1.25V to 2.75V
THS4532PWEVM Product Diagram:

The THS4532PWEVM features on-board connectors for direct connection to power supplies, signal sources, and test equipment. The default configuration supports single-ended input, single-ended output (via transformer), and discrete power supply operation, with straightforward conversion to differential input, differential output, and single-supply modes.

THS4532PWEVM Features:
Discrete power supply configuration design, easily convertible to single-supply mode
Default single-ended input configuration readily convertible to differential input
Default single-ended output configuration readily convertible to differential output
Independent disable control line per channel
Independent output common-mode control line per channel
Optimised for connection to standard 50-ohm input/output impedance test equipment
Input and output fitted with SMA connectors

THS4532PWEVM Supported Products:
Fully differential amplifiers
THS4532 — Dual, ultra-low power 0.25mA, RRO, fully differential amplifier
Ultra-low power:
Voltage: 2.5V to 5.5V
Current: 250µA
Power-saving mode: 0.5µA (typical)
Fully differential architecture
Bandwidth: 36MHz
Slew rate: 200V/μs
Total harmonic distortion (THD): -120dBc at 1kHz (1VRMS, RL=2kΩ)
Input Voltage Noise: 10 nV/√Hz (f=1 kHz)
High DC Accuracy:
VOS: ±100 µV
VOS Drift: ±3 µV/°C (-40°C to +125°C)
AOL: 114 dB
Rail-to-Rail Output (RRO)
Negative Rail Input (NRI)
Output Common-Mode Control

Mingjiada Electronics maintains long-term supply of TI's THS4532PWEVM evaluation module for assessing the functionality of the THS4532 fully differential amplifier. For further product information regarding the THS4532PWEVM, please visit Mingjiada Electronics' official website (https://www.integrated-ic.com/) to obtain additional supply details.