In highly complex current sensing applications—such as electric drive systems for new energy vehicles, 48V architectures, and DC-DC converters—sensor accuracy and response speed directly impact system efficiency and safety. Shenzhen Mingjiada Electronics Co., Ltd. has long specialized in the high-performance semiconductor supply chain and now reliably supplies the Melexis MLX91217LVA-ACA-000-CR high-speed programmable current sensor chip, providing genuine OEM products and professional inventory support for your BMS, inverter, and overcurrent protection designs.
I. Product Overview: Gen 2.5 High-Speed Current Sensing Solution
The MLX91217 belongs to Melexis’s 2.5th-generation high-speed current sensor IC series. Utilizing traditional Hall-effect technology in conjunction with an external ferromagnetic core, it can measure DC currents ranging from ±50A to ±5000A. This device converts the magnetic flux density within the air gap of the ferrite core into a fast analog output proportional to a 5V supply, with a response time as low as 2 µs. It is specifically designed for demanding automotive and industrial applications such as inverters, converters, and high-voltage traction motors.
II. Key Performance Parameters
The key specifications of the MLX91217LVA-ACA-000-CR are as follows:
Sensitivity: 10 mV/mT (factory calibrated)
Measurement Range: ±15 mT to ±450 mT (magnetic field); measures ±50 A to ±5,000 A when used with a magnetic core
Bandwidth: DC to 250 kHz
Response Time: < 3 µs (typically 2 µs)
Linearity: ±0.2% of full scale
Output Type: Proportional analog voltage (approximately 2.5 V bipolar output)
Operating Temperature: -40°C to +150°C
Supply Voltage: 4.5 V to 5.5 V (5 V ±10%)
Package: SIP4-VA (through-hole)
Automotive Certification: AEC-Q100 Grade 0
Compared to the previous-generation MLX91209, this chip offers significant improvements in thermal stability: thermal zero drift as low as ±5 mV (a 50% improvement) and thermal sensitivity drift of < ±1% (a 33% improvement), ensuring high consistency across the entire temperature range.
III. Extensive Programmability and Diagnostic Capabilities
The MLX91217 is an end-to-end programmable sensor. Developers can use the Melexis PTC-04 programming tool and PSF library to flexibly configure the following parameters:
Gain, offset, and filter adjustment
Output clamping level programming
On-chip filter optimization (trade-off between resolution, bandwidth, and response time)
At the system safety level, the chip integrates open-circuit detection and programmable diagnostic functions. The output can be pulled low or high to indicate a fault condition, helping the system respond quickly to abnormal situations. Additionally, each chip features a 48-bit unique ID, supporting traceability throughout its entire lifecycle.
IV. Typical Application Scenarios
The MLX91217LVA-ACA-000-CR is widely used in new energy vehicles and industrial power electronics, including but not limited to:
High-voltage traction motor inverters: Real-time phase current monitoring
48V boost regenerative inverters: Current detection in energy recovery systems
DC-DC converters: Closed-loop control of power conversion modules
Smart battery junction boxes: Battery pack current monitoring and protection
Smart fuse overcurrent detection: Rapid response to short-circuit faults
DC bus link monitoring
V. Packaging and Procurement Information
The MLX91217LVA-ACA-000-CR is housed in a SIP4-VA package, with pins supporting various molding and wiring configurations to facilitate mechanical integration and PCB assembly. This device complies with RoHS regulations, has an MSL rating of 1 (unrestricted moisture sensitivity level), and has a minimum order quantity of 3,500 pieces (reel-and-tape packaging).
As a professional electronic component supply chain service provider, Mingjiada Electronics guarantees that all products are 100% genuine and authentic, and supports immediate delivery, bulk pricing inquiries, and forward orders.
To request samples or receive a bulk quote for the MLX91217LVA-ACA-000-CR, please contact the sales team at Shenzhen Mingjiada Electronics Co., Ltd.
Your message must be between 20-3,000 characters!
English
