company blog about Mingjiada Supply/Acquisition LIFCL-40-9MG121C CrossLink-NX™ Field Programmable Gate Array (FPGA) IC

Mingjiada Supply/Acquisition LIFCL-40-9MG121C CrossLink-NX™ Field Programmable Gate Array (FPGA) IC

Shenzhen Mingjiada Electronics Co., Ltd. – Supplier/Recycler of [Lattice] LIFCL-40-9MG121C: CrossLink-NX™ Field-Programmable Gate Array (FPGA) IC. Product details are as follows:

LIFCL-40-9MG121C (CrossLink-NX™ Series Low-Power FPGA) is built on the Lattice Nexus platform, combining 28 nm FD-SOI technology with an optimised FPGA architecture to reduce the soft error rate by a factor of 100 and lower power consumption by up to 75% compared to competitors. It features a compact package, with a minimum size of just 4 mm x 4 mm.

Basic Information:
Model: LIFCL-40-9MG121C
Series: CrossLink-NX™
Number of LABs/CLBs: 9,750
Number of logic elements/cells: 39,000
Total RAM bits: 1,548,288
I/O Count: 72
Voltage - Supply: 0.95V ~ 1.05V
Mounting Type: Surface Mount
Operating Temperature: 0°C ~ 85°C (TJ)
Package/Housing: 121-VFBGA, CSPBGA
Supplier Device Package: 121-CSFBGA (6x6)

LIFCL-40-9MG121C CrossLink-NX: An FPGA for embedded vision processing, enabling MIPI bridging and edge AI, with a high memory-to-logic-cell ratio, delivering industry-leading performance for vision processing applications, up to 170 bits per logic cell, accelerating AI inference.

LIFCL-40-9MG121C High-Speed Interfaces — 2.5 Gbps hard-core MIPI D-PHY, 5 Gbps PCIe, 1.5 Gbps programmable I/O, 1066 Mbps DDR3. Supports LVDS, subLVDS, OpenLDI (OLDI) and SGMII. The FPGA architecture enables signal aggregation, replication and splitting.

LIFCL-40-9MG121C Features
Instant configuration — IO configuration completed within 3 ms, device configuration in as little as 8 ms
FD-SOI programmable feedback bias optimised for each device’s performance and power consumption
Two hard-core 4-channel MIPI D-PHY transceivers, operating at 10 Gbps per PHY
Up to 37 programmable source-synchronous I/O pairs for connecting cameras and displays
Lowest soft error rate in its class, with 100-fold improvement in reliability compared to competitors

LIFCL-40-9MG121C Applications:
Edge AI processing
Sensor aggregation
Image sensor processing
Signal splitting or replication
Embedded vision

The LIFCL-40-9MG121C CrossLink-NX series FPGA is based on the Nexus™ FPGA platform and utilises low-power 28 nm FD-SOI technology. It combines the immense flexibility of an FPGA with the low power consumption and high reliability of FD-SOI technology (due to extremely low SER), whilst offering small-form-factor packaging options. The CrossLink-NX supports a wide range of interfaces, including MIPI D-PHY (CSI-2 and DSI), LVDS, SLVS, sub-LVDS, DDR3, PCI Express® (Gen1 and Gen2), SGMII (Gigabit Ethernet), and more.

Mingjiada Electronics has specialised in the electronic components supply chain for over twenty years, boasting extensive original manufacturer channel resources and industry experience. With both supply and recycling capabilities, we assist customers in addressing dual requirements for procurement and inventory disposal. For further details regarding the LIFCL-40-9MG121C, to request samples or enquire about buy-back prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for more information on supply and demand.