company blog about Mingjiada Supply Qorvo, ADI, TI RF Devices, Supply RF Front End Modules, RF Transceivers, RF Mixers, RF Switches

Mingjiada Supply Qorvo, ADI, TI RF Devices, Supply RF Front End Modules, RF Transceivers, RF Mixers, RF Switches

Shenzhen Mingjiada Electronics Co., Ltd. — as a professional distributor of electronic components, focuses on three major brands in the RF device field: Qorvo, ADI, and TI. We offer a wide range of products, including RF front-end modules, filters, mixers, RF switches, power amplifiers, and transceivers. Below are the relevant categories and typical models supplied by Mingjiada:

I. Qorvo RF Devices
Qorvo products are renowned for their high performance and high integration, widely applied in 5G base stations, smartphones, IoT, and other fields.
1. RF Front-End Modules (FEM)
QPF4005 Series: Specifically designed for Wi-Fi 6/6E routers, integrating a PA, LNA, and switch, supporting dual-band 2.4GHz/5GHz, with excellent energy efficiency and thermal management.
QM19000 Series: Targeted at 5G base station millimeter-wave applications, operating in the 24-30GHz frequency band, supporting large-scale MIMO and beamforming.
2. RF Filters
QPQ1298: Multi-band LTE filter (700MHz–2700MHz), supports carrier aggregation, with insertion loss as low as 2.5dB.
QPQ1903: BAW filter (1800MHz), with insertion loss as low as 1.5dB, suitable for 5G smartphones and base stations.
3. Mixers
HMC213: Wideband dual-balanced mixer (0.1–10GHz) with low LO drive power (+13dBm), suitable for software-defined radio (SDR).
HMC520: Millimeter-wave mixer (24–44GHz) with conversion loss of 8dB, used for 5G millimeter-wave communication and radar.
4. RF Switch ICs
QM23005: High-power SOI switch (40 dBm), supporting 4G/5G multi-band switching, with ESD protection.
QM13344/45: SP4T switch, with shutdown capacitance as low as 95 fF, supporting 5G antenna tuning, operating voltage >80 Vp.
5. RF Power Amplifiers
QPA2575: Ka-band amplifier (32–38GHz), output power 3W, small-signal gain 19dB.
QPA2310/QPA2309: C-band GaN amplifiers, output power 50W and 100W respectively, efficiency over 50%.

II. ADI RF and Microwave Devices
ADI products are known for their high dynamic range and low noise performance, making them suitable for applications such as wireless infrastructure and defence systems.
1. Microwave Detection and Receivers
ADL6010: Microwave power detector (500MHz–40GHz), linearity error ±0.5dB over the full temperature range, suitable for high-precision signal sampling.
ADRF6620: DPD (Digital Pre-Distortion) receiver with integrated frequency synthesiser and mixer, supporting 700MHz–2.7GHz, with OIP3 up to 44dBm, suitable for LTE-A base stations.
2. Baseband Signal Processor
ADRF6518: Dual-channel programmable VGA with a bandwidth of 63MHz, supporting 112MHz channel receivers, with strong out-of-band interference suppression capability.

III. TI RF Sampling
TI products focus on multi-channel integration and wideband processing, suitable for 5G base stations and wireless access devices.
RF Transceivers
AFE7700: A four-channel transceiver supporting a 200MHz instantaneous bandwidth, with an integrated DPD feedback path, suitable for phased array systems.
AFE7920/21: A 4TX/4RX multi-band transceiver supporting a 600MHz signal bandwidth, with dynamic switching between TDD/FDD modes.

Mingjiada Electronics integrates RF core components from Qorvo, ADI, and TI to provide high-performance solutions for 5G, IoT, and industrial equipment. For specific model parameters or real-time inventory, please visit the Mingjiada Electronics official website (https://www.integrated-ic.com/) to inquire about supply details.