company blog about Mingjiada Supply ST VN7010AJTR High Side Driver With MultiSense Analog Feedback For Automotive Applications

Mingjiada Supply ST VN7010AJTR High Side Driver With MultiSense Analog Feedback For Automotive Applications

Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply (ST) VN7010AJTR Single Channel High-Side Driver, Below is the product information for High-Side Driver VN7010AJTR:

Part Number: VN7010AJTR

Package: PowerSSO-16

Type: High-Side Driver

Product Details: VN7010AJTR——High-side driver with MultiSense analog feedback for automotive applications

Product Overviews Of VN7010AJTR

VN7010AJTR is a single channel high-side driver manufactured using ST proprietary VIPower® M0-7 technology and housed in PowerSSO-16 package.

VN7010AJTR is designed to drive 12V automotive grounded loads through a 3V and 5V CMOS-compatible interface, providing protection and diagnostics.

VN7010AJTR integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off.

VN7010AJTR——A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality.

VN7010AJTR——A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCC and OFF-state open-load.

VN7010AJTR——A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.

Product Attributes Of VN7010AJTR

Series: VIPower™
Switch Type: General Purpose
Number of Outputs: 1
Ratio - Input:Output: 1:1
Output Configuration: High Side
Output Type: N-Channel
Interface: On/Off
Voltage - Load: 4V ~ 28V
Voltage - Supply (Vcc/Vdd): Not Required
Current - Output (Max): 65A
Rds On (Typ): 10mOhm
Input Type: Non-Inverting
Features: Auto Restart, Status Flag
Fault Protection: Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Operating Temperature: -40°C ~ 150°C (TJ)
Mounting Type: Surface Mount
Supplier Device Package: PowerSSO-16
Package / Case: 16-PowerLFSOP (0.154", 3.90mm Width)

Features Of VN7010AJTR

• General
− Single channel smart high-side driver with MultiSense analog feedback
− Very low standby current
− Compatible with 3 V and 5 V CMOS outputs
• MultiSense diagnostic functions
− Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
− Overload and short to ground (power limitation) indication
− Thermal shutdown indication
− OFF-state open-load detection
− Output short to VCC detection
− Sense enable/disable
• Protections
− Undervoltage shutdown
− Overvoltage clamp
− Load current limitation
− Self limiting of fast thermal transients
− Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin

Applications Of VN7010AJTR
• All types of Automotive resistive, inductive and capacitive loads
• Specially intended for Automotive Headlamps

Block Diagram Of VN7010AJTR

Mingjiada Electronics Long Term Supply (ST) VN7010AJTR Single Channel High-Side Driver, For more product information about VN7010AJTR, please check the official website of Mingjiaoda Electronics (https://www.integrated-ic.com/).