company blog about Mingjiada Supply TI THS4501EVM Evaluation Module, For Evaluating The Performance Of The THS4501 Fully Differential Operational Amplifier

Mingjiada Supply TI THS4501EVM Evaluation Module, For Evaluating The Performance Of The THS4501 Fully Differential Operational Amplifier

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supply of the TI THS4501EVM evaluation module: Suitable for assessing the performance of the THS4501 fully differential operational amplifier (FDA). Below are the product details for the THS4501EVM evaluation module:

The Texas Instruments THS4501EVM evaluation module (EVM) assists designers in evaluating the performance of the THS4501 fully differential operational amplifier (FDA). Furthermore, this EVM exemplifies high-speed PCB design.

The THS4501EVM evaluation module supports users in implementing multiple circuit configurations to validate the configurability illustrated in the schematic. Users are not restricted to the circuit configurations shown here; the module's extensive hardware interfaces mean the only limitation to design is the user's creativity.

The THS4501EVM provides a platform for developing high-speed FDA application circuits. It incorporates the THS4501 high-speed FDA chip, multiple passive components, and various functional modules with pin layouts, enabling users to experiment, test, and validate different operational amplifier circuit designs. The PCB dimensions are 3.08 × 2.42 inches.

THS4501EVM Product Specifications:
Channels per IC: 1 - Single-channel
Amplifier Type: Differential
Output Type: Differential
Slew Rate: 2800 V/µs
-3dB Bandwidth: 370 MHz
Gain-Bandwidth Product: 300 MHz
Current - Output/Channel: 120mA
Current - Supply (Main IC): 23mA
Voltage - Supply, Single/Dual (±): 4.5V to 15V, ±2.25V to 7.5V
IC/Parts Used: THS4501
Contents: Board
THS4501EVM Product Image:

The THS4501EVM evaluation board enables assessment of different gain configurations by replacing the feedback resistor and gain-setting resistor. All components except the transformer are pre-installed on the THS4501EVM evaluation board. The default configuration is based on a 50-ohm signal source and includes the source-side terminating resistor R1.

THS4501EVM High-Speed Operational Amplifier EVM Features:
+5V to ±5V supply voltage range
Supports single-ended and fully differential input modes
Supports single-ended and fully differential output modes
Equipped with anti-aliasing filter pads
Equipped with low-pass filter pads
Exemplary case study for high-speed amplifier PCB design and layout

Products supported by the THS4501EVM:
Fully differential amplifiers
THS4501 — +/-5V high-speed fully differential amplifier
Product features:
Fully differential architecture
Bandwidth: 370 MHz
Slew rate: 2800 V/µs
Third-order intermodulation distortion (IMD3): -90 dBc at 30 MHz
Third-order intercept point (OIP3): 49 dBm at 30 MHz
Output common-mode control
Wide supply voltage range: 5 V, ±5 V, 12 V, 15 V
Input common-mode range extended to include negative supply rail

【Mingjiada Electronics】offers long-term supply of TI's (THS4501EVM) high-speed operational amplifier evaluation module. For further product information regarding the THS4501EVM or to enquire about samples, please visit Mingjiada Electronics' official website (https://www.integrated-ic.com/) for detailed supply information.