company blog about NXP PN7150B0HN High-Performance NFC Controller With Integrated Firmware For Smart Devices

NXP PN7150B0HN High-Performance NFC Controller With Integrated Firmware For Smart Devices

Product Description Of PN7150B0HN
PN7150B0HN is a full NFC controller solution with integrated firmware and NCI interface designed for contactless communication at 13.56 MHz. It is compatible with NFC forum requirements.

These NFC controllers support the most popular platforms, Raspberry Pi®, BeagleBone® Black and any boards featuring an Arduino® stackable header, including Kinetis®, LPCXpresso and i.MX boards.

Specification Of PN7150B0HN
Operating Frequency:13.56 MHz
Maximum Operating Temperature:+ 85 C
Minimum Operating Temperature:- 30 C
Package/Case:HVQFN-40
Function:Read
Moisture Sensitive:Yes
Unit Weight:95.253 mg

Features Of PN7150B0HN
Full hardware and software compatibility
Support for Linux, Android, RTOS and NullOS
Interface to Raspberry Pi, BeagleBone Black, and all boards with Arduino®-compatible header
All NFC operating modes
Read/Write Mode: ISO/IEC 14443 A and B up to 848 kbit/s, FeliCa at 212 and 424 kbit/s, MIFARE Classic with 1K, 4K, NFC Forum type 1, 2, 3, 4, 5 tags, ISO/IEC 15693
All peer-to-peer modes
Card Emulation Mode (from host): NFC Forum T4T (ISO/IEC 14443 A and B) at 106 kbit/s, NFC Forum T3T
Flexible host interface
Supply voltage: 1.8 to 3.3 V
I²C interface: 3.4 Mbit/s
NCI 1.0-compliant protocol
IRQ signal for improved synchronization
Complete, power-efficient NFC control
RF driver: 3.0 to 4.75 V, 180mA max
Implemented according to device requirements v1.3
Fully configurable polling loop with low-power mode
Load modulation scheme: active

Key Benefits Of PN7150B0HN
Seamless integration of NFC into any application, especially those with OS systems
Plug-and-play NFC operation with many platforms, including most LPC, QorIQ®, Kinetis and i.MX boards
All typical NFC use cases, including pairing, personalization, extended user interface, maintenance, etc
Fast deployment of advanced, fully interoperable NFC functionality, with a lower overall cost

Applications Of PN7150B0HN
All devices requiring NFC functionality especially those running in an Android or Linux environment
TVs, set-top boxes, blu-ray decoders, audio devices
Home automation, gateways, wireless routers
Home appliances
Wearables, remote controls, healthcare, fitness
Printers, IP phones, gaming consoles, accessories

Block Diagram Of PN7150B0HN

PN7150B0HN Connection