Original ADI Switching Regulators, Supply LT8607EMSE Synchronous Step Down Regulator
Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply ADI (LT8607EMSE) High Speed Synchronous Monolithic Step-Down Switching Regulator. Below are product details for LT8607EMSE:
LT8607EMSE——Basic Information:
Part Number: LT8607EMSE
Package: MSOP-10
Type: Synchronous Step-Down Regulator
Product Details: LT8607EMSE——42V, 750mA Synchronous Step-Down Regulator with 2.5μA Quiescent Current.
Product Attributes Of LT8607EMSE
Function: Step-Down
Output Configuration: Positive
Topology: Buck
Output Type: Adjustable
Number of Outputs: 1
Voltage - Input (Min): 3V
Voltage - Input (Max): 42V
Voltage - Output (Min/Fixed): 1.8V
Voltage - Output (Max): 12V
Current - Output: 750mA
Frequency - Switching: 200kHz ~ 2.2MHz
Synchronous Rectifier: Yes
Operating Temperature: -40°C ~ 125°C (TJ)
Mounting Type: Surface Mount
Package / Case: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package: 10-MSOP-EP
LT8607EMSE is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of non-switching quiescent current.
LT8607EMSE can deliver 750mA of continuous current. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P.
LT8607EMSE——Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8607EMSE reducing the input supply current to 1µA.
Features Of LT8607EMSE
Wide Input Voltage Range: 3.0V to 42V
Ultralow Quiescent Current Burst Mode® Operation:
- <3µA IQ Regulating 12VIN to 3.3VOUT
- Output Ripple <10mVP-P
High Efficiency 2MHz Synchronous Operation
- >93% Efficiency at 0.5A, 12VIN to 5VOUT
750mA Maximum Continuous Output
Fast Minimum Switch-On Time: 35ns
Adjustable and Synchronizable: 200kHz to 2.2MHz
Allows Use of Small Inductors
Spread Spectrum Frequency Modulation for Low EMI
Low Dropout
Peak Current Mode Operation
Accurate 1V Enable Pin Threshold
Internal Compensation
Output Soft-Start and Tracking
Small Thermally Enhanced 10-Lead MSOP Package
Applications Of LT8607EMSE
General Purpose Step Down Converter
Low EMI Step Down
LT8607EMSE——Typical Applicatioin
[Mingjiada Electronics] Long Term Supply ADI (LT8607EMSE) 42V, 750mA Synchronous Step-Down Regulator, For more product information about LT8607EMSE, please visit the official website of Mingjiada Electronics (https://www.integrated-ic.com/).
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753