company blog about Original NXP Arm Microcontrollers, Supply LPC1788FET208 Scalable Mainstream 32-Bit Microcontroller MCU

Original NXP Arm Microcontrollers, Supply LPC1788FET208 Scalable Mainstream 32-Bit Microcontroller MCU

Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply NXP (LPC1788FET208) 32-Bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core, Below are the product details for MCU LPC1788FET208:

LPC1788FET208——Basic Information:
Part Number: LPC1788FET208
Package: TFBGA-208
Type: 32-Bit Single-Core Microcontroller IC
Product Details: LPC1788FET208——32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM.

LPC1788FET208 is an ARM Cortex-M3 based microcontroller for embedded applications requiring a high level of integration and low power dissipation.

LPC1788FET208 adds a specialized flash memory accelerator to accomplish optimal performance when executing code from flash. The LPC1788FET208 operates at up to 120 MHz CPU frequency. The analog peripherals include one eight-channel 12-bit ADC and a 10-bit DAC.

Product Attributes Of LPC1788FET208
Core Processor: ARM® Cortex®-M3
Core Size: 32-Bit Single-Core
Speed: 120MHz
Connectivity: CANbus, EBI/EMI, Ethernet, I2C, Microwire, Memory Card, SPI, SSI, SSP, UART/USART, USB OTG
Peripherals: Brown-out Detect/Reset, DMA, I2S, LCD, Motor Control PWM, POR, PWM, WDT
Number of I/O: 165
Program Memory Size: 512KB (512K x 8)
Program Memory Type: FLASH
EEPROM Size: 4K x 8
RAM Size: 96K x 8
Voltage - Supply (Vcc/Vdd): 2.4V ~ 3.6V
Data Converters: A/D 8x12b; D/A 1x10b
Oscillator Type: Internal
Operating Temperature: -40°C ~ 85°C (TA)
Mounting Type: Surface Mount
Supplier Device Package: 208-TFBGA (15x15)
Package / Case: 208-TFBGA

Applications Of LPC1788FET208
Communications:
- Point-of-sale terminals, web servers, multi-protocol bridges
Industrial/Medical:
- Automation controllers, application control, robotics control, HVAC, PLC, inverters, circuit breakers, medical scanning, security monitoring, motor drive, video intercom
Consumer/Appliance:
- Audio, MP3 decoders, alarm systems, displays, printers, scanners, small appliances, fitness equipment
Automotive:
- After-market, car alarms, GPS/fleet monitors

LPC1788FET208 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 120 MHz. LPC1788FET208 features include 512 kB of flash memory, 96 kB of data memory, Ethernet, USB 2.0 Host/OTG/Device , 8-channel DMA controller, 5 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, QEI, LCD controller, SD/MMC interface, motor control PWM, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 165 general purpose I/O pins.

Features Of LPC1788FET208

Arm Cortex-M3 processor, running at frequencies of up to 120 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
Multilayer AHB matrix interconnect provides a separate bus for each AHB leader
Split APB bus allows for higher throughput
Cortex-M3 system tick timer, including an external clock input option
Standard JTAG test/debug interface, Serial Wire Debug and Serial WireTrace Port
Emulation trace module supports real-time trace
Boundary scan for simplified board testing
Non-maskable Interrupt (NMI) input
512 kB on-chip flash program memory
96 kB on-chip SRAM
4 kB on-chip EEPROM
In-System Programming (ISP) and In-Application Programming (IAP) capabilities
LCD controller, supporting both STN and TFT displays
External Memory Controller (EMC)
Eight channel General Purpose DMA controller (GPDMA)
Ethernet MAC with MII/RMII interface and associated DMA controller
USB 2.0 full-speed dual port device/host/OTG controller with on-chip PHY and DMA
Five UARTs with fractional baud rate generation
Three SSP controllers with FIFO and multi-protocol capabilities
Three enhanced I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
CAN controller with two channels
SD/MMC memory card interface
Up to 165 General Purpose I/O (GPIO) pins
Two external interrupt inputs configurable as edge/level sensitive
Four general purpose timers/counters
Quadrature encoder interface that can monitor one external quadrature encoder
Two standard PWM/timer blocks with external count input option
Real-Time Clock (RTC) with a separate power domain
Windowed Watchdog Timer (WWDT)
12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 400 kHz
10-bit Digital-to-Analog Converter (DAC)
Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
Wake-up Interrupt Controller (WIC)
Processor wake-up from Power-down mode via any interrupt
Brownout detect with separate threshold for interrupt and forced reset
On-chip Power-On Reset (POR)
On-chip crystal oscillator with an operating range of 1 MHz to 25 MHz
12 MHz Internal RC oscillator (IRC) trimmed to 1% accuracy
Unique device serial number for identification purposes
Single 3.3 V power supply (2.4 V to 3.6 V)

[Mingjiada Electronics] Long Term Supply NXP (LPC1788FET208) Scalable Mainstream 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core, For more product information about MCU LPC1788FET208, please visit the official website of Mingjiada Electronics (https://www.integrated-ic.com/).