Original ST SPC5 performance MCUs, Supply SPC563M64L5COAR 32-Bit Power Architecture MCU
Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply ST (SPC563M64L5COAR) 32-bit Power Architecture MCU for Automotive Powertrain Applications, Below is the product information for MCU SPC563M64L5COAR:
SPC563M64L5COAR——Basic Information:
Part Number: SPC563M64L5COAR
Package: LQFP-144 (20x20)
Type: 32-Bit Single-Core Microcontroller IC
Product Details: SPC563M64L5COAR——80MHz, 32-Bit Single-Core e200z3 SPC56 Microcontroller IC, 1.5MB (1.5M x 8) FLASH.
Product Attributes Of SPC563M64L5COAR
Series: SPC56
Core Processor: e200z3
Core Size: 32-Bit Single-Core
Speed: 80MHz
Connectivity: CANbus, EBI/EMI, LINbus, SCI, SPI, UART/USART
Peripherals: DMA, POR, PWM, WDT
Number of I/O: 80
Program Memory Size: 1.5MB (1.5M x 8)
Program Memory Type: FLASH
RAM Size: 94K x 8
Voltage - Supply (Vcc/Vdd): 1.14V ~ 1.32V
Data Converters: A/D 32x12b
Oscillator Type: Internal
Operating Temperature: -40°C ~ 125°C (TA)
Mounting Type: Surface Mount
Supplier Device Package: 144-LQFP (20x20)
Package / Case: 144-LQFP
SPC563M64L5COAR is 32-bit automotive microcontrollers, SPC563M64L5COAR contain many new features coupled with high performance 90 nm CMOS technology to provide substantial reduction of cost per feature and significant performance improvement.
SPC563M64L5COAR——The advanced and cost-efficient host processor core of this automotive controller family is built on Power Architecture® technology. The SPC563M64L5COAR contains enhancements that improve the architecture’s fit in embedded applications, includes additional instruction support for Digital Signal Processing (DSP), integrates technologies—such as an enhanced time processor unit, enhanced queued analog-to-digital converter, Controller Area Network, and an enhanced modular input-output system—that are important for today’s lower-end powertrain applications.
SPC563M64L5COAR has a single level of memory hierarchy consisting of up to 94 KB on-chip SRAM and up to 1.5 MB of internal flash memory. The SPC563M64L5COAR also has an External Bus Interface (EBI) for ‘calibration’. This external bus interface has been designed to support most of the standard memories used with the SPC564Axx and SPC563Mxx families.
Features Of SPC563M64L5COAR
Single issue, 32-bit Power Architecture®Book E compliant e200z335 CPU core complex
- Includes Variable Length Encoding (VLE) enhancements for code size reduction
32-channel Direct Memory Access controller (DMA)
Interrupt Controller (INTC) capable of handling 364 selectable-priority interrupt sources: 191 peripheral interrupt sources, 8 software interrupts and 165 reserved interrupts.
Frequency-Modulated Phase-Locked Loop (FMPLL)
Calibration External Bus Interface (EBI)1
System Integration Unit (SIU)
Up to 1.5 Mbyte on-chip Flash with Flash controller
- Fetch Accelerator for single cycle Flash access @80 MHz
Up to 94 Kbyte on-chip static RAM (including up to 32 Kbyte standby RAM)
Boot Assist Module (BAM)
32-channel second-generation enhanced Time Processor Unit (eTPU)
- 32 standard eTPU channels
- Architectural enhancements to improve code efficiency and added flexibility
16-channels enhanced Modular Input-Output System (eMIOS)
Enhanced Queued Analog-to-Digital Converter (eQADC)
Decimation filter (part of eQADC)
Silicon die temperature sensor
2 Deserial Serial Peripheral Interface (DSPI) modules (compatible with Microsecond Bus)
2 enhanced Serial Communication Interface (eSCI) modules compatible with LIN
2 Controller Area Network (FlexCAN) modules that support CAN 2.0B
Nexus Port Controller (NPC) per IEEE-ISTO 5001-2003 standard
IEEE 1149.1 (JTAG) support
Nexus interface
On-chip voltage regulator controller that provides 1.2 V and 3.3 V internal supplies from a 5 V external source.
[Mingjiada Electronics] Long Term Supply ST (SPC563M64L5COAR) 32-Bit Single-Core Microcontroller IC, For more product information about MCU SPC563M64L5COAR or to purchase samples, please visit the official website of Mingjiada Electronics (https://www.integrated-ic.com/).
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753