company blog about 【Sale NXP】Low Cost Microcontroller (MCU) LPC804M101JHI33 Based on Arm® Cortex®M0+ Core

Shenzhen Mingjiada Electronics Co., Ltd Original Genuine [Sell NXP] Low Cost Microcontroller (MCU) LPC804M101JHI33 Based on the Arm® Cortex®M0+ core, it operates at up to 15 MHz.The LPC80x MCU series supports up to 32 KB of Flash memory and 4 KB of SRAM.

Description of the LPC804M101JHU

The LPC804M101JHI33's peripherals include a CRC engine, two I2C bus interfaces, up to two USARTs, an SPI interface, capacitive touch interface (Cap Touch), a multirate timer, wake-up timer, a general-purpose 32-bit counter/timer, a 12-bit ADC, a 10-bit DAC, an analogue comparator, a function matrix via switches, and a switch matrix for function comparison. A 12-bit ADC, a 10-bit DAC, an analogue comparator, functionally configurable I/O ports via a switch matrix, an input pattern matching engine, programmable logic unit (PLU), and up to 30 general-purpose I/O pins.

Features

SYSTEMS

• Arm Cortex-M0+ processor (version r0p1) with up to 15 MHz runtime, integrated single-cycle multiplier and fast single-cycle I/O ports
• Arm Cortex-M0+ with built-in nestable vector interrupt controller (NVIC)
• System beat timer
• AHB Multi-Layer Matrix
• Serial Wire Debug (SWD) with four breakpoints and two watchpoints JTAG boundary-scan (BSDL) support

Memory

• Up to 32 KB of on-chip Flash programming memory
• Code Read Protection (CRP)
• Up to 4 KB SRAM
• Dual I/O power supplies (LPC802M011JDH20, LPC804M111JDH24):
• Independent power supplies on each side of the package support level-shifted signals from one off-chip power domain to the other, and/or direct connection of off-chip peripherals with different power levels

ROM API support

• Bootloader
• Supports Flash In-Application Programming (IAP)
• Supports In-System Programming (ISP) via USART
• On-chip ROM API for integer division
• Free-Run Oscillator (FRO) API

Digital Peripherals

• High-speed GPIO interface to Arm Cortex-M0+ I/O bus, integrating up to 30 general purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, and input inverters GPIO directional control supports setting/clearing/toggling individual bits independently
• High-current source output driver (20 mA) on three pins
• GPIO interrupt generation with Boolean mode matching on 8 GPIO inputs. (LPC804)
• Switching matrix for flexible configuration of each I/O pin's functionality
• CRC engine
• Capacitive touch interface (LPC804)
• Programmable Logic Unit (PLU) Used to create small combinational and/or sequential logic networks, including simple state machines. (LPC804)
• Timer
• A 32-bit general purpose counter/timer with 4 match inputs and 3 capture inputs supporting PWM mode and external counting.
• Multi-Rate Timer (MRT) capable of generating repetitive interrupts at up to four programmable fixed rates
• Wake-up timer (WKT) with free-running oscillator (FRO), low-power, low-frequency internal oscillator, or external clock inputs as clock inputs
• Windowed Watchdog Timer (WWDT)

Analogue Peripherals

• A 12-bit ADC with up to 12 input channels and multiple internal and external flip-flop inputs and sample rates up to 480 KS/s. The ADC supports two independent conversion sequences.
• Comparator with five input pins and external or internal reference voltage.
• One 10-bit DAC (LPC804)

Serial Peripherals

• Two USART interfaces with pin assignments via a switch matrix and a fractional baud rate generator.
• 1 SPI controller with pin assignment via switch matrix
• Up to two I2C bus interfaces supporting data rates up to 400 kbit/s (standard digital pins)

Clock generation

• Free-Run Oscillator (FRO) This oscillator provides selectable 9 MHz, 12 MH, and 15 MHz outputs that can be used as the system clock FRO is tuned to ±1 % accuracy over the full voltage and temperature range of 0 °C to 70 °C
• 1 MH low-power oscillator that can be used as a clock source
• Clock output function, frequency divider to reflect all internal clock sources

Power control

• Low-power modes: sleep mode, deep sleep mode, power-down mode, and deep power-down mode
• Wake from deep sleep and power-down modes via activity on USART, SPI and I2C peripherals
• Wake from deep power-down mode via multiple pins
• Timer-controlled self wake-up from sleep, deep sleep and deep power-down modes
• Power On Reset (POR)
• Power-On Reset (POR) Power-Off Detection (BOD)

Other Features

• Unique serial number for chip identification
• Single or dual power supply (1.71 V to 3.6 V)
• Operating temperature range: -40 °C to +105 °C

Applications

• Wearable products
• Hearing aids
• Smart watches
• Industrial controls
• Surround Vision
• Vital Signs Monitors
• Air Conditioning (AC)
• Motion Control & Robotics
• Smart Cities
• POS Terminal
• Smart Home
• Home Control Panels
• Home Energy Displays
• Toys and board games
• Communications Infrastructure
• Broadband modems and home gateways

For more information, please call Mr Chen

Tel: +86 13410018555

Email: sales@hkmjd.com

Home URL: www.hkmjd.com