Introduction
With the rapid growth of the new energy vehicle and energy storage industries, the performance of the Battery Management System (BMS) directly determines the safety, service life and overall energy efficiency of the battery pack. As the core component of the BMS, the measurement accuracy and reliability of the battery monitoring chip are of paramount importance. Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term stock of genuine ADI ADBMS6815 12-channel multi-cell battery stack monitors, providing high-precision, highly reliable BMS solutions for applications such as electric vehicles and energy storage systems.
I. ADBMS6815 Product Overview
The ADBMS6815 is a multicell battery stack monitor launched by Analog Devices (ADI), capable of measuring up to 12 battery cells connected in series, with a lifetime total measurement error (TME) of less than 1.5 mV. The chip features a wide battery measurement range of 0 V to 5 V and is suitable for the vast majority of battery chemistries (including lithium iron phosphate and ternary lithium, amongst others).
The ADBMS6815 is the flagship model in ADI’s ADBMS series and serves as the successor to the LTC6811-1. As an AEC-Q100 automotive-grade certified chip, the ADBMS6815WFS variant is specifically designed to meet the ISO 26262 functional safety standard and supports the system integration requirements for Automotive Safety Integrity Level D (ASIL D).
II. ADBMS6815 Key Technical Features
1. Ultra-high-precision measurement
The ADBMS6815 utilises a 16-bit successive approximation ADC, coupled with a low-drift precision voltage reference, resulting in a lifetime total measurement error of less than 1.5 mV. Measurements for all 12 battery cells can be completed within 304 microseconds, whilst lower data acquisition rates can be selected to achieve high noise suppression. This high-precision, high-speed measurement capability significantly improves the accuracy of State of Charge (SOC) and State of Health (SOH) estimation.
2. Stackable Architecture and Daisy-Chain Communication
Multiple ADBMS6815 devices can be connected in series via the isoSPI™ isolated serial interface to enable synchronous monitoring of long-distance, high-voltage battery strings. The isoSPI interface offers the following advantages:
High-speed communication: Data transfer rates of up to 2 Mb/s
Long-distance transmission: Up to 20 metres over a single twisted-pair cable
Bidirectional communication: Supports line break protection to ensure communication integrity even in the event of a fault in the communication path
Low EMI: Low electromagnetic interference emissions and high immunity
Hot-swap capability: No external protection circuitry required
3. Passive Balancing Function
The ADBMS6815 incorporates a passive balancing current of up to 300 mA per channel, supporting programmable PWM duty cycle control to enable precise battery balancing management.
4. Extensive I/O interfaces
The chip provides seven GPIO or analogue input ports, which can be used for temperature detection or the acquisition of other sensor signals. It can also be configured in I²C or SPI controller mode, facilitating communication with the host MCU.
5. Ultra-low power consumption
The supply current in sleep mode is only 5.5 µA, significantly reducing the system’s standby power consumption.
6. Compact Package
It utilises a 48-pin LQFP package (7 mm × 7 mm) with exposed pads, facilitating heat dissipation and PCB design.
III. ADBMS6815 Product Technical Specifications
Number of monitoring channels: 12 batteries in series
Total Measurement Error (TME) over lifetime: < 1.5 mV
Battery measurement range: 0 V to 5 V
Measurement time for all channels: 304 µs
ADC resolution: 16-bit
isoSPI data rate: 2 Mb/s
isoSPI cable length: up to 20 metres
Passive equalisation current: up to 300 mA per channel
Sleep mode current: 5.5 µA
Package: 48-pin LQFP (7 × 7 mm)
Automotive qualification: AEC-Q100
Functional safety: ISO 26262 ASIL D (WFS model)
IV. ADBMS6815 Key Application Scenarios
Thanks to its high precision, high reliability and flexible, scalable architecture, the ADBMS6815 is widely used in the following scenarios:
Electric and hybrid vehicles (EV/HEV)
This is the ADBMS6815’s core application area. In the high-voltage battery packs of electric vehicles, operating at hundreds of volts, real-time monitoring of the voltage and temperature of hundreds of series-connected cells is required. The ADBMS6815’s automotive-grade certification (AEC-Q100) and support for ISO 26262 ASIL D functional safety make it an ideal choice for secondary control boards in electric vehicle BMS systems. By daisy-chaining multiple ADBMS6815 devices via isoSPI, synchronous monitoring of all cells across the entire battery pack can be achieved.
Grid Energy Storage Systems
In large-scale energy storage facilities, battery clusters are typically composed of a large number of cells connected in series. The ADBMS6815’s high-precision measurement capabilities enable accurate assessment of the state of each individual cell, optimising charge and discharge strategies and extending the overall lifespan of the energy storage system.
Backup Battery Systems
Backup battery systems for critical facilities such as data centres and telecommunications base stations require long-term, reliable operation. The ADBMS6815’s ultra-low sleep power consumption and guaranteed lifetime accuracy make it suitable for extended standby scenarios.
Large Portable Power Banks
High-power portable energy storage devices also require precise battery management. The ADBMS6815’s 12-channel monitoring capability and compact package provide a highly integrated BMS solution for portable devices.
Wireless BMS (wBMS) Systems
The ADBMS6815 series also supports operation within wireless battery management systems, where wired daisy-chain connections can be replaced by 2.4 GHz wireless BMS nodes, further simplifying harness design.
V. Why Choose Mingjiada Electronics?
✅ Genuine stock, fast delivery
Established in 1996, Shenzhen Mingjiada Electronics Co., Ltd. is an authorised independent distributor of globally renowned electronic components. The company maintains a long-term stock of genuine, original ADI ADBMS series products across all models, covering a complete product range from 6-channel to 24-channel units.
Mingjiada boasts a stock of over 2 million popular models. Through its warehouse network in Shenzhen and Hong Kong, it guarantees immediate availability and can offer ultra-short lead times of 1–3 days, making it particularly suitable for urgent orders.
✅ Comprehensive Product Range
In addition to the ADBMS6815, Mingjiada also supplies the full ADBMS product range, including the ADBMS6816 (6-channel), ADBMS6817 (8-channel) and ADBMS6830 (16-channel), as well as battery management chips from world-renowned brands such as TI, Infineon, NXP, Renesas and ST.
Contact Us
Contact: Mr Chen
Tel: +86 13410018555
Email: sales@hkmjd.com
Address: Rooms 1239–1241, Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province
Tags: ADBMS6815WCSWZ, ADBMS6815WCSW, ADBMS6815WCS, ADBMS6815WC, ADBMS6815W, ADBMS6815
Your message must be between 20-3,000 characters!
English
