ST Original STM32L451VET6 80MHz 32Bit ARM Cortex M4 Microcontroller
Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supply of ST (STM32L451VET6) 80MHz, 32-bit ARM® Cortex®-M4 STM32L4 microcontroller IC. Below are the product details for the STM32L451VET6 MCU:
STM32L451VET6 — Basic Information:
Model: STM32L451VET6
Package: LQFP-100
Type: 32-bit Microcontroller — MCU
Product Description: STM32L451VET6 — Ultra-low power 80 MHz Arm Cortex-M4 MCU with FPU, featuring 512-KB Flash memory and DFSDM.
STM32L451VET6 Specifications:
Series: STM32L4
Core Processor: ARM® Cortex®-M4
Core Specification: 32-bit
Speed: 80 MHz
I/O Count: 83
Program Memory Capacity: 512 KB (512K x 8)
Program Memory Type: Flash
RAM Size: 160K x 8
Supply Voltage (Vcc/Vdd): 1.71V to 3.6V
Data Converters: A/D 16x12b; D/A 1x12b
Oscillator type: Internal
Operating temperature: -40°C to 85°C (TA)
Mounting type: Surface mount
Supplier device package: 100-LQFP (14x14)
Package/case: 100-LQFP
STM32L451VET6 is ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm® single-precision data-processing instructions and data types.
STM32L451VET6 embed high-speed memories (Flash memory up to 512 Kbyte, 160 Kbyte of SRAM), a Quad SPI Flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
STM32L451VET6 embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.
Features Of STM32L451VET6
Ultra-low-power with FlexPowerControl
– 1.71 V to 3.6 V power supply
– -40 °C to 85/125 °C temperature range
– 145 nA in VBAT mode: supply for RTC and 32x32-bit backup registers
– 22 nA Shutdown mode (5 wakeup pins)
– 106 nA Standby mode (5 wakeup pins)
– 375 nA Standby mode with RTC
– 2.05 µA Stop 2 mode, 2.40 µA with RTC
– 84 µA/MHz run mode
– Batch acquisition mode (BAM)
– 4 µs wakeup from Stop mode
– Brown out reset (BOR)
– Interconnect matrix
STM32L451VET6 Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions
Performance benchmark
– 1.25 DMIPS/MHz (Drystone 2.1)
– 273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)
Up to 83 fast I/Os, most 5 V-tolerant
Memories
– Up to 512 KB single bank Flash, proprietary code readout protection
– 160 KB of SRAM including 32 KB with hardware parity check
– Quad SPI memory interface
16x communication interfaces
– 1x SAI (serial audio interface)
– 4x I2C FM+(1 Mbit/s), SMBus/PMBus
– 3x USARTs (ISO 7816, LIN, IrDA, modem)
– 1x UART (LIN, IrDA, modem)
– 1x LPUART (Stop 2 wake-up)
– 3x SPIs (and 1x Quad SPI)
– CAN (2.0B Active) and SDMMC interface
– IRTIM (Infrared interface)
STM32L451VET6 — Circuit schematic:
![]()
STM32L451VET6 offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, one DAC channel, an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.
STM32L451VET6 also feature standard and advanced communication interfaces, namely four I2Cs, three SPIs, three USARTs, one UART and one Low-Power UART, one SAI, one SDMMC, one CAN.
STM32L451VET6 operates in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes makes possible the design of low-power applications.
[Mingjiada Electronics] offers long-term supply of ST's (STM32L451VET6) ultra-low power 32-bit microcontroller MCUs. For further product information or pricing enquiries regarding the STM32L451VET6, please visit Mingjiada Electronics' official website (https://www.integrated-ic.com/) to view supply details.
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753