company blog about Supply ADI LTC4367HDD 100V Overvoltage, Undervoltage and Reverse Supply Protection Controller

Supply ADI LTC4367HDD 100V Overvoltage, Undervoltage and Reverse Supply Protection Controller

Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply ADI (LTC4367HDD) Supply Protection Controller, Below are the product details for the LTC4367HDD:

Part Number: LTC4367HDD

Package: DFN-8

Type: Supply Protection Controller

Product Details: https://www.integrated-ic.com/sale-52643377-ltc4367hdd-integrated-circuit-chip-100v-overvoltage-undervoltage-and-reverse-supply-protection-contr.html——100V Overvoltage, Undervoltage and Reverse Supply Protection Controller

LTC4367HDD Protects applications where power supply input voltages may be too high, too low or even negative. LTC4367HDD does this by controlling the gate voltages of a pair of external N-channel MOSFETs to ensure that the output stays within a safe operating range.The LTC4367HDD withstands voltages between –40V and 100V and has an operating range of 2.5V to 60V, while consuming only 70μA in normal operation.

LTC4367HDD——Two comparator inputs allow configuration of the overvoltage (OV) and undervoltage (UV) set points using an external resistive divider. A shutdown pin provides external control for enabling and disabling the MOSFETs as well as placing the LTC4367HDD in a low current shutdown state. A fault output indicates that the GATE pin is pulling low when the part is in shutdown or the input voltage is outside the UV and OV set points.

LTC4367HDD has a 32ms turn-on delay that debounces live connections and blocks 50Hz to 60Hz AC power. For fast recovery after faults, the LTC4367-1 has a reduced turn-on delay of 500μs.

Specification Of LTC4367HDD

Applications: Overvoltage, Undervoltage Protection

Current - Supply: 70µA

Voltage - Supply: 2.5V ~ 60V

Operating Temperature: -40°C ~ 125°C

Mounting Type: Surface Mount

Package / Case: 8-WFDFN Exposed Pad

Supplier Device Package: 8-DFN (3x3)

Features Of LTC4367HDD

Wide Operating Voltage Range: 2.5V to 60V

Overvoltage Protection to 100V

Reverse Supply Protection to –40V

LTC4367: Blocks 50Hz and 60Hz AC Power

LTC4367: 32ms Recovery from Fault

LTC4367-1: Fast 500µs Recovery from Fault

No Input Capacitor or TVS Required for MostApplications

Adjustable Undervoltage and Overvoltage Thresholds

Controls Back-to-Back N-Channel MOSFETs

Low Operating Current: 70µA

Low Shutdown Current: 5µA

8-Pin MSOP and 3mm × 3mm DFN Packages

Applications Of LTC4367HDD

Portable Instrumentation

Industrial Automation

Automotive Surge (Load Dump) Protection

Network Equipment

Typical Applicarion Of LTC4367HDD

Mingjiada Electronics Long Term Supply ADI (LTC4367HDD) Supply Protection Controller, For more product information about the LTC4367HDD, please visit the Mingarda Electronics website (https://www.integrated-ic.com/).