company blog about Supply [NXP] LPC11E68JBD48 Arm Microcontrollers——Scalable Entry Level 32-Bit Microcontroller IC

Supply [NXP] LPC11E68JBD48 Arm Microcontrollers——Scalable Entry Level 32-Bit Microcontroller IC

[Shenzhen Mingjiada Electronics Co., Ltd.] Long-Term Supply (NXP) LPC11E68JBD48 Scalable Entry Level 32-Bit Microcontroller IC, Below is information about the microcontroller LPC11E68JBD48:

Part Number: LPC11E68JBD48

Package: LQFP-48

Type: 32-Bit Microcontroller IC

Product Overviews Of LPC11E68JBD48

LPC11E68JBD48 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 50 MHz. LPC11E68JBD48 support up to 256 KB of flash memory, a 4 KB EEPROM, and 36 KB of SRAM.

LPC11E68JBD48——The ARM Cortex-M0+ is an easy-to-use, energy-efficient core using a two-stage pipeline and fast single-cycle I/O access.

LPC11E68JBD48——The peripheral complement of the LPC11E6x includes a DMA controller, a CRC engine, two I2C-bus interfaces, up to five USARTs, two SSP interfaces, PWM/timer subsystem with six configurable multi-purpose timers, a Real-Time Clock, one 12-bit ADC, temperature sensor, function-configurable I/O ports, and up to 80 general-purpose I/O pins.

System Features Of LPC11E68JBD48
Cortex-M0 or Cortex-M0+ processor, running at frequencies of up to 50 MHz
Cortex-M0 or Cortex-M0+ built-in nested vectored interrupt controller (NVIC)
Serial wire debug (SWD) and JTAG boundary scan modes supported
System tick timer

Memory Features Of LPC11E68JBD48
LPC11E68JBD48 Up to 256 KB on-chip flash programming memory with page erase
Up to 32 KB main SRAM
Up to two additional SRAM blocks of 2 KB each (LPC11E6x parts)
Up to 4 KB EEPROM
In-System programming (ISP) and In-Application programming (IAP)

Digital Peripherals Of LPC11E68JBD48
Simple DMA engine with 16 channels and programmable input triggers
LPC11E68JBD48 Up to 80 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors
Pin interrupt and pattern match engine using eight selectable GPIO pins
Two GPIO interrupt generators
CRC Engine
Programmable Windowed WatchDog Timer (WDT)
Up to four 32-bit and two 16-bit counter/timers or two 32-bit and six 16-bit counter/timers
Up to 21 match outputs and 16 capture inputs
Up to 19 PWM outputs with 6 independent time bases

Analog Peripherals Of LPC11E68JBD48
One 10/12-bit ADC with up to 12 input channels and sample rates of up to 2 Msample/s
Temperature sensor

Serial Interfaces Of LPC11E68JBD48
Up to five USART interfaces and RS-485 mode support
Up to two SSP controllers
Up to two I²C-bus interfaces

Clock Generation Of LPC11E68JBD48
12 MHz internal RC oscillator trimmed to 1 % accuracy that can optionally be used as a system clock
Crystal oscillator with an operating range of 1 MHz to 25 MHz
Programmable watchdog oscillator
PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal
Clock output function with divider that can reflect the crystal oscillator clock, the main clock, the IRC, or the Watchdog oscillator

Power Control Of LPC11E68JBD48
Integrated PMU (Power Management Unit) to minimize power consumption
Reduced power modes: Sleep, Deep-sleep, Power-down and Deep power-down modes
Processor wake-up from Deep-sleep and Power-down modes on external pin inputs
Power-On Reset (POR)
Brownout detect

[Shenzhen Mingjiada Electronics Co., Ltd.] Supply NXP LPC11E68JBD48——Scalable Entry Level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M0+ and Cortex®-M0 Cores.

Product Attributes Of LPC11E68JBD48

Core Processor: ARM® Cortex®-M0+
Core Size: 32-Bit Single-Core
Speed: 50MHz
Connectivity: I2C, Microwire, SPI, SSI, SSP, UART/USART
Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number of I/O: 36
Program Memory Size: 256KB (256K x 8)
Program Memory Type: FLASH
EEPROM Size: 4K x 8
RAM Size: 36K x 8
Voltage - Supply (Vcc/Vdd): 2.4V ~ 3.6V
Data Converters: A/D 8x12b SAR
Oscillator Type: Internal
Operating Temperature: -40°C ~ 105°C (TA)
Mounting Type: Surface Mount
Supplier Device Package: 48-LQFP (7x7)
Package / Case: 48-LQFP

Additional Features Of LPC11E68JBD48

Unique device serial number for identification.
Single power supply (2.4 V to 3.6 V).
Separate VBAT supply for RTC.
Operating temperature range -40 °C to 105 °C.
Available as LQFP48 packages

Applications Of LPC11E68JBD48
Three-phase e-meter

Car radio
GPS tracker

Medical monitor
Gaming accessories

PC peripherals

Company URL: https://www.integrated-ic.com/

FAQ
Q. Are your products original?
A: Yes, all products are original, new original import is our purpose.
Q:Which Certificates do you have?
A:We are ISO 9001:2015 Certified Company and member of ERAI.
Q:Can you support small quantity order or sample?Is the sample free?
A:Yes,we support sample order and small order.Sample cost is different according to your order or project.
Q:How to ship my order? Is it safe?
A:We use express to ship,such as DHL,Fedex,UPS,TNT,EMS.We can also use your suggested forwarder.Products will be in good packing and ensure the safety and we are responsible to product damage to your order.
Q:What about the lead time?
A:We can ship stock parts within 5 working days.If without stock,we will confirm lead time for you based on your order quantity.