company blog about Supply TI TAS5753MDDCAR Digital Input Open Loop Class-D Audio Amplifier With Digital Audio Processor

Supply TI TAS5753MDDCAR Digital Input Open Loop Class-D Audio Amplifier With Digital Audio Processor

[Shenzhen Mingjiada Electronics Co., Ltd.] Long Term Supply (TI) TAS5753MDDCAR Digital Input Class-D Audio Amplifier, Below are the product details for amplifier TAS5753MDDCAR:

Part Number: TAS5753MDDCAR

Package: HTSSOP-48

Type: Audio Amplifiers

Product Details: TAS5753MDDCAR——20W I²S Input Class-D Amplifier With Digital Audio Processor and DirectPath™ HP and Line Driver.

TAS5753MDDCAR is an efficient, digital-input audio amplifier for driving stereo speakers configured as a bridge tied load (BTL). One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders.

TAS5753MDDCAR accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

TAS5753MDDCAR is a slave-only device receiving all clocks from external sources. The TAS5753MDDCAR operates with a PWM carrier between a 384-kHz switching rate and a 288-kHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

TAS5753MDDCAR has an integrated Directpath™ Headphone amplifier and linedriver to increase the system-level integration and reduce total solution costs.

Product Attributes Of TAS5753MDDCAR

Type: Class D
Voltage - Supply: 4.5V ~ 24V
Features: Depop, Short-Circuit and Thermal Protection
Mounting Type: Surface Mount
Operating Temperature: 0°C ~ 85°C (TA)
Supplier Device Package: 48-HTSSOP
Package / Case: 48-PowerTFSOP (0.240", 6.10mm Width)

Features Of TAS5753MDDCAR
Audio Input/Output
– Supports BTL Configuration With 4Ω Load
– One Stereo Serial Audio Input
– I2C Address Selection Pin
– Supports 44.1kHz and 48kHz Sample Rates (LJ/RJ/I2S)
Headphone Amplifier and Line Driver
– Independent Channel Volume Controls With Gain of 24 dB to Mute in 0.125-dB Steps
– Programmable Three-Band Automatic Gain Limiting (AGL)
– 20 Programmable Biquads for Speaker EQ and Other Audio-Processing Features
General Features
– I2C Serial Control Interface Operational Without MCLK
– Automatic Rate Detection
– Thermal, Short-Circuit, and Undervoltage Protection
– 105-dB SNR, A-Weighted, Referenced to Full Scale (0 dB)
– Up to 90% Efficient
– AD, BD, and Ternary Modulation
– PWM Level Meter
– Operates from 4.5V to 24V PVDD

Applications Of TAS5753MDDCAR

LCD TV, LED TV
Low-Cost Soundbar
General Low-Cost Audio Equipment

Functional Block Diagram Of TAS5753MDDCAR

Output Power VS Supply Voltage（TAS5753MDDCAR）

TAS5753MDDCAR——20W stereo, 39W mono, 4.5V to 26.4V, digital input open loop Class-D audio amplifier with AGL and HP.

TAS5753MDDCAR - 20W stereo, 39W mono, 4.5V to 26.4V, digital input open loop Class-D audio amplifier with AGL and HP.
Mingjiada Electronics Supply (TI) TAS5753MDDCAR Class-D Audio Amplifier, for more information about TAS5753MDDCAR, welcome to check out the official website of Mingjiada Electronics (https://www.integrated-ic.com/).