TI AM2432BSDFHIALVR High Integrated Dual-Core 800MHz Sitara™ Microcontrollers
Shenzhen Mingjiada Electronics Co., Ltd. supplies and recycles the TI AM2432BSDFHIALVR, a highly integrated dual-core 800MHz Sitara™ microcontroller.
The TI AM2432BSDFHIALVR is a highly integrated dual-core 32-bit microcontroller within the Sitara™ series, designed for industrial control, edge computing, motor drives and communication gateways. Operating at a stable 800MHz clock speed, it integrates dual Arm® Cortex®-R5F real-time cores, a rich array of industrial interfaces, a security engine and analogue peripherals. With its small form factor, low power consumption and strong real-time performance, it meets the demands of demanding industrial applications.
I. Core Architecture and Performance of the AM2432BSDFHIALVR
1. Dual-Core Real-Time Processing Cores
Equipped with two Cortex®-R5F cores that operate independently and support lockstep mode, each core runs at 800MHz. This provides nanosecond-level interrupt response and hard real-time computing capabilities, making it suitable for applications with extremely high timing precision requirements, such as PLCs, servo drives and industrial robots.
Core Architecture: Harvard architecture with hardware FPU, single-cycle multiplication/division, 32-bit general-purpose registers, and support for the Thumb-2 instruction set, balancing code density and execution efficiency.
Memory Configuration: On-chip 512KB SRAM (with ECC error correction to enhance industrial reliability) and 2MB on-chip Flash; supports external QSPI Flash and SDRAM expansion to meet the storage requirements of complex control algorithms and firmware.
2. Real-time and Security Features
Built-in Hardware Security Module (HSM): Supports AES-128/256, SHA-256, RSA and ECC encryption, enabling secure firmware boot, data encryption and authentication, in compliance with industrial cybersecurity standards.
Functional Safety: Lockstep core + ECC memory + hardware self-test, meeting IEC 61508 SIL-3 and IEC 60730 Class B safety levels, suitable for high-safety industrial applications.
Real-time Optimisation: Dedicated interrupt controller, low-latency peripheral interfaces, and hardware timers, with interrupt response latency < 1μs, ensuring real-time multitasking scheduling.
II. AM2432BSDFHIALVR: Highly Integrated Industrial Peripherals and Interfaces
The AM2432BSDFHIALVR integrates the full range of industrial control peripherals onto a single chip, significantly reducing the number of external components, lowering BOM costs and PCB footprint. Key interfaces are as follows:
1. Industrial Communication Interfaces (Core Advantage)
Ethernet: Integrates two industrial Ethernet controllers, supporting mainstream industrial protocols such as EtherCAT, PROFINET, EtherNet/IP and Modbus TCP. Supports 10/100 Mbps and features a built-in protocol acceleration engine to reduce CPU load.
Fieldbus: 2 x CAN FD (up to 5 Mbps), 2 x UART (supporting RS-485/RS-232), 4 x SPI, and 4 x I2C, compatible with traditional buses such as Modbus RTU, DeviceNet and CANopen.
Multi-protocol support: Hardware-integrated protocol stack acceleration enables multi-bus gateway functionality without the need for additional coprocessors.
2. Motor Control and Analogue Peripherals
Motion Control: 8 enhanced PWM (ePWM) channels, 4 capture units (eCAP), 4 quadrature encoder interfaces (eQEP), supporting three-phase motor FOC control and servo position feedback, compatible with servo drives, inverters and stepper motor control.
Analogue Front-End: Integrated 16-channel 12-bit ADCs (1 MSPS sampling rate), 4 analogue comparators, and 2 DACs; supports differential and single-ended inputs; features built-in hardware oversampling and filtering to simplify current, voltage, and temperature acquisition circuits.
3. General-Purpose and Expansion Interfaces
GPIO: Up to 100+ general-purpose I/O pins, supporting 5V tolerance, suitable for industrial digital I/O and relay control.
Storage Expansion: QSPI, OSPI, and SD/MMC interfaces, supporting high-speed Flash and memory card expansion.
Debugging: JTAG and Serial Wire Debug (SWD), supporting real-time debugging and over-the-air firmware updates.
![]()
III. AM2432BSDFHIALVR Package, Power Consumption and Electrical Specifications
Package Specifications: 17mm × 17mm BGA package (ALVR), 289 pins; compact size suitable for compact industrial modules, servo drives and embedded gateways.
Operating Conditions: 3.3V I/O + 1.0V core voltage, operating temperature range -40°C to 125°C (industrial grade), suitable for harsh environments with wide temperature ranges.
Power consumption optimisation: Supports dynamic voltage regulation and multi-mode low-power operation (sleep / stop / deep sleep). Typical operating power consumption < 800mW, standby power consumption < 10mW, suitable for battery-powered and low-power industrial nodes.
IV. Typical Application Scenarios for the AM2432BSDFHIALVR
Industrial Automation: PLC controllers, remote I/O modules, industrial gateways, data acquisition units (DAQ)
Motor and Motion Control: Servo drives, variable frequency drives, stepper motor controllers, industrial robot joint control
Smart Edge Devices: Industrial Internet of Things (IIoT) edge nodes, protocol converters, energy management controllers
Automotive and Transport: On-board control units, charging station control, rail transport signal control modules
V. Summary of Key Advantages of the AM2432BSDFHIALVR
High-performance dual-core real-time processing: 800MHz Cortex-R5F lockstep cores, meeting industrial hard real-time and functional safety requirements
Ultra-high integration: Single-chip integration of industrial Ethernet, motor control, analogue front-end and safety engine, significantly simplifying system design
Wide temperature range and high reliability: Industrial-grade -40°C to 125°C, ECC memory and hardware self-test, suitable for harsh industrial environments
Comprehensive ecosystem: Mature development tools, protocol stacks and algorithm libraries, lowering the development threshold and accelerating product deployment
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753