Product Details:
|
Part Number: | STM32F102C8T6 | Core:: | ARM Cortex M3 |
---|---|---|---|
Program Memory Size:: | 64 KB | Data Bus Width:: | 32 Bit |
ADC Resolution:: | 12 Bit | Maximum Clock Frequency:: | 48 MHz |
STM32F102C8T6 Microcontroller MCU 48MHz ARM Cortex M3 MCU LQFP-48 Package
Product Description Of STM32F102C8T6
STM32F102C8T6 medium-density USB access line incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 64 or 128 Kbytes and SRAM of 10 or 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs, two SPIs, one USB and three USARTs), one 12-bit ADC and three general-purpose 16-bit timers.
STM32F102C8T6 operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
Specifications Of STM32F102C8T6
|
ARM Cortex M3 |
|
64 kB |
|
32 bit |
|
12 bit |
|
48 MHz |
|
37 I/O |
|
10 kB |
|
2 V |
|
3.6 V |
|
- 40 C |
|
+ 85 C |
Height: |
1.4 mm |
Interface Type: |
I2C, SPI, USART, USB |
Length: |
7 mm |
Moisture Sensitive: |
Yes |
Number of ADC Channels: |
10 Channel |
Number of Timers/Counters: |
3 Timer |
Width: |
7 mm |
Unit Weight: |
181.700 mg |
Features Of STM32F102C8T6
Core: Arm® 32-bit Cortex®-M3 CPU
48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
Single-cycle multiplication and hardware division
Memories
64 or 128 Kbytes of Flash memory
10 or 16 Kbytes of SRAM
Clock, reset and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC
PLL for CPU clock
32 kHz oscillator for RTC with calibration
Low power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
Debug mode
Serial wire debug (SWD) and JTAG interfaces
DMA
7-channel DMA controller
Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
Conversion range: 0 to 3.6 V
Temperature sensor
Up to 51 fast I/O ports
37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Up to six timers
Three 16-bit timers, each with up to four IC/OC/PWM or pulse counter
Two watchdog timers (Independent and Window)
SysTick timer: 24-bit downcounter
Up to eight communication interfaces
Up to two I2C interfaces (SMBus/PMBus)
Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to two SPIs (12 Mbit/s)
One USB 2.0 full speed interface
CRC calculation unit, 96-bit unique ID
ECOPACK packages
Other Supply Product Types
Part Number |
Package |
IKZ50N65ES5 |
TO-247-4 |
IKW50N65EH5 |
TO-247-3 |
AIGW50N65H5XKSA1 |
TO-247-3 |
AIGW40N65H5XKSA1 |
TO-247-3 |
IKFW60N60DH3EXKSA1 |
TO-247-3 |
AIGW50N65F5XKSA1 |
TO-247-3 |
AIKW40N65DF5XKSA1 |
TO-247-3 |
AIKW40N65DH5XKSA1 |
TO-247-3 |
IKZ75N65EL5XKSA1 |
TO-247-4 |
AIKW50N65DH5XKSA1 |
TO-247-3 |
AIKW50N65RF5XKSA1 |
TO-247-3 |
AIKW75N60CTXKSA1 |
TO-247-3 |
AIKP20N60CTAKSA1 |
TO-220-3 |
IKFW50N65DH5XKSA1 |
TO-247-3 |
AUIRGDC0250 |
TO-220-3 |
IKW75N120CH7 |
TO-247-3 |
IKQ120N120CH7XKSA1 |
TO-247-3 |
ISL9V5036P3-F085 |
TO-220-3 |
FGH75T65SHD-F155 |
TO-247-3 |
ISL9V5045S3ST-F085 |
TO-263-3 |
FGY120T65SPD-F085 |
TO-247-3 |
FGH20N60SFDTU |
TO-247-3 |
FGD3325G2-F085V |
TO-247-3 |
FGD3245G2-F085V |
TO-252-3 |
ISL9V3040D3STV |
TO-252-3 |
FGD3245G2-F085C |
TO-252-3 |
FGP3440G2-F085 |
TO-220-3 |
NGTB35N65FL2WG |
TO-247-3 |
ISL9V3040P3-F085C |
TO-220-3 |
FGI3040G2-F085C |
TO-262-3 |
FAQ
Q: Are your products original?
A: Yes, all products are original, new original import is our purpose.
Q:Which Certificates do you have?
A:We are ISO 9001:2015 Certified Company and member of ERAI.
Q:Can you support small quantity order or sample?Is the sample free?
A:Yes,we support sample order and small order.Sample cost is different according to your order or project.
Q:How to ship my order? Is it safe?
A:We use express to ship,such as DHL,Fedex,UPS,TNT,EMS.We can also use your suggested forwarder.Products will be in good packing and ensure the safety and we are responsible to product damage to your order.
Q:What about the lead time?
A:We can ship stock parts within 5 working days.If without stock,we will confirm lead time for you based on your order quantity.
Contact Person: Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753