LTC4313IMS8-2 MSOP-8 Hot Swappable Two Wire Buffer with 2.5mA Accelerator Integrated Circuit Chip

The LTC4313IMS8-2 is a hot swappable 2-wire bus buffer in a MSOP-8 package that keeps a live backplane running while cards are inserted or removed. Buffering is bidirectional with low offset and a noise margin of 0.3 times VCC.

This variant provides 2.5 mA rise time accelerator current. That choice sets how quickly a capacitive bus is pulled high, or whether the buffer can bridge busses running at different logic levels.

During insertion SDA and SCL are precharged to 1 V, and the input is connected to the output only after ENABLE is high and a stop bit or bus idle condition has been detected, so a new card cannot corrupt traffic.

Stuck bus disconnect and recovery logic releases the bus when a slave holds SDA low, and unpowered devices present high impedance on both lines. Non-compliant parts that drive VOL above 0.4 V are tolerated, and several buffers can be cascaded.

This Industrial I grade device is specified from -40 to +85 degree C, is RoHS compliant and lead free, and ships with full traceability. Samples and volume pricing are available on request.

• LTC4313IMS8-2 hot swappable 2-wire bus buffer in MSOP-8 package
• LTC4313 series in stock with full traceability and volume pricing
• Bidirectional buffering with low offset voltage
• High noise margin with VIL at 0.3 times VCC
• Works with devices that drive a VOL above 0.4 V
• Rise time accelerator with 2.5 mA rise time accelerator current
• Level translation between 3.3 V and 5 V busses
• Precharged SDA and SCL lines to 1 V during insertion
• Prevents SDA and SCL corruption during live board insertion
• Stuck bus disconnect and automatic recovery
• Compatible with I2C, I2C fast mode and SMBus
• Plus or minus 4 kV human body model ESD ruggedness
• High impedance SDA and SCL pins when unpowered
• MSOP-8 package

• Hot swap backplane and line cards
• Server and telecom I2C buses
• Multi-card systems with live insertion
• Level translation between 3.3 V and 5 V buses
• Capacitive bus rise time correction

Typical use is digitally controlled resistance and divider trimming in surface mount assemblies.

• 15+ years of electronic components experience
• Secure ordering process
• Excellent customer feedback
• Confirmed delivery dates
• Competitive pricing on volume orders
• Global export experience with responsive after-sales support

Related parts we regularly stock and ship in parallel with the series on this page appear below.