|
Product Details:
|
| Highlight: | MAX6725AKAWGD3 Integrated Circuit Chip,MAX6725 |
||
|---|---|---|---|
The MAX6725AKAWGD3 monitors two factory trimmed rails at 1.665 V and 1.110 V plus a third supply through an adjustable input referenced to 0.62 V. Reset asserts when any monitored rail falls below its threshold and stays low for 140 ms minimum after all rails recover.
Reset is open-drain and active low, and a manual reset input allows a push button or test point to force a reset. The watchdog input monitors processor activity with a long initial timeout for boot-up followed by a short normal timeout, so a program that stops executing is caught and the reset output is asserted.
A power-fail comparator with its own open-drain output gives an early warning before the rail collapses, letting firmware save state before reset. Supply current is 14 microamps typical, the reset output is valid while either monitored supply stays above 0.8 V, and short supply transients are rejected by the glitch immunity circuit.
The part is specified from -40 to +125 degrees Celsius and comes in an eight-lead SOT23, which suits multi-rail boards where a single supervisor must watch several supplies and the processor at the same time.
| Product Model | MAX6725 |
|---|---|
| Function | Triple supervisory circuit with watchdog and power-fail comparator |
| Package | 8-Lead SOT23 |
| Primary Threshold | 1.665 V |
| Secondary Threshold | 1.110 V |
| Third Input | Adjustable, 0.62 V reference |
| Reset Timeout | 140 ms minimum (280 ms maximum) |
| Manual Reset Input | Yes |
| Watchdog | Input, long start-up and normal timeout modes |
| Power-Fail Comparator | Yes, with dedicated output |
| Reset Output | Open-drain active low |
| Power-Fail Output | Open-drain active low |
| Supply Current | 14 microamps typical |
| Operating Temperature | -40 to +125 degrees Celsius |
| Compliance | RoHS compliant |
Thresholds come from the ordering code and the third input is set by an external resistor divider against the 0.62 V reference. The power-fail comparator may be left unused by tying PFI to a valid rail.
Shenzhen Mingjiada Electronics Co., Ltd. is an independent distributor of electronic components from established manufacturers. Founded in Shenzhen in 1996, Mingjiada has established branches in Hong Kong, Japan, Russia, and Taiwan.
Certified under ISO9001:2014 for quality management systems and ISO14001:2014 for environmental management systems. With an experienced team in sales, R&D and management, we specialize in distributing products from more than 500 established suppliers.
Adhering to the principle of "maximizing benefits for customers," we offer comprehensive product ranges and provide high-quality, responsive service through professional logistics and customer service teams.
Other product types we regularly stock and supply appear below.
| Part Number | Series |
|---|---|
| ADP5062ACPZ-1 | ADP5062 |
| ADP5062ACPZ-2 | ADP5062 |
| ADP5061ACBZ | ADP5061 |
| LT3651IUHE-8.4 | LT3651 |
| LT3650IMSE-8.4 | LT3650 |
| LT3652IMSE | LT3652 |
| LTC3586EUFE-2 | LTC3586 |
| LTC3586EUFE-3 | LTC3586 |
| LTC4156EUFD | LTC4156 |
| LTC4156IUFD | LTC4156 |
| LTC4000EGN | LTC4000 |
| LTC4000EUFD | LTC4000 |
| LTC4015IUHF | LTC4015 |
| LTC4162IUFD | LTC4162 |
| LTM8026IY | LTM8026 |
| LTM8026MPV | LTM8026 |
| MAX8903AETI | MAX8903 |
Contact Person: Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753