|
Product Details:
|
| Highlight: | MAX6856UK23D3 Integrated Circuit Chip,MAX6856 |
||
|---|---|---|---|
The MAX6856UK23D3 is a nanopower microprocessor supervisory circuit that watches a single supply rail and asserts its open-drain active-low reset output when that rail falls below the factory-trimmed threshold. The output stays asserted for the full reset timeout after the supply recovers, so the processor cannot start while the rail is still settling.
The trip point is trimmed to 2.313 V typical, with a guaranteed window of 2.255 V to 2.371 V and 2.5 percent accuracy over -40 to +85 degrees Celsius. This makes the part a good fit for 2.5 V rails that must be released only when the regulator is stable. Threshold hysteresis of 0.5 percent keeps the output from toggling repeatedly when the rail rises slowly or carries ripple.
Because the output is open drain, it can be pulled to the processor logic rail through an external resistor, so one part works with 1.8 V, 2.5 V or 3.3 V logic. Supply current is only 170 nA typical at 1.8 V with reset deasserted, so supervision costs almost nothing in a battery budget, and the output stays valid with the supply as low as 1.1 V.
A manual reset input allows a button, test point or debug header to request a reset without cycling power. Reset is released 225 ms typical (150 ms minimum) after the rail is valid, which gives oscillators and regulators time to settle. Only a 0.1 microfarad bypass capacitor is required, and the part fits the five-lead SOT23 outline at 1.1 mm height.
| Product Model | MAX6856 |
|---|---|
| Function | Nanopower microprocessor supply supervisor |
| Reset Output | Open drain, active low (external pullup required) |
| Reset Threshold | 2.313 V typical (2.255 V min, 2.371 V max) |
| Threshold Accuracy | 2.5 percent over temperature |
| Threshold Hysteresis | 0.5 percent typical |
| Reset Timeout | 225 ms typical (150 ms min, 300 ms max) |
| Manual Reset Input | Yes |
| Watchdog Timer | Not included |
| Supply Voltage | 1.2 V to 5.5 V |
| Supply Current | 170 nA typical at 1.8 V, no load |
| Reset Valid Down To | VCC = 1.1 V |
| VCC to Reset Delay | 40 microseconds |
| Operating Temperature | -40 to +85 degrees Celsius |
| Package | 5-Pin SOT23 |
| Compliance | Lead free, RoHS compliant |
A pullup resistor to the processor logic rail is required because the reset output is open drain; a 0.1 microfarad bypass capacitor should sit close to the VCC pin.
Shenzhen Mingjiada Electronics Co., Ltd. is an independent distributor of electronic components from established manufacturers. Founded in Shenzhen in 1996, Mingjiada has established branches in Hong Kong, Japan, Russia, and Taiwan.
Certified under ISO9001:2014 for quality management systems and ISO14001:2014 for environmental management systems. With an experienced team in sales, R&D and management, we specialize in distributing products from more than 500 established suppliers.
Adhering to the principle of "maximizing benefits for customers," we offer comprehensive product ranges and provide high-quality, responsive service through professional logistics and customer service teams.
Other product types we regularly stock and supply appear below.
| Part Number | Series |
|---|---|
| TGL2208-SM | TGL2208 |
| TGL2209-SM | TGL2209 |
| TGL2210-SM | TGL2210 |
| TGL2217-SM | TGL2217 |
| TGL2927-SM | TGL2927 |
| TGP2105-SM | TGP2105 |
| CMD297P34 | CMD297P34 |
| TGP2109-SM | TGP2109 |
| TGP2107-SM | TGP2107 |
| TGP2615-SM | TGP2615 |
| QM28007 | QM28007 |
| QM28011 | QM28011 |
| QM28014 | QM28014 |
| QM28017 | QM28017 |
| QPQ1270 | QPQ1270 |
| QPQ1297 | QPQ1297 |
| CMD181K3 | CMD181K3 |
Contact Person: Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753