|
Product Details:
|
| Highlight: | MAX6753KA29 Integrated Circuit Chip,MAX6753 |
||
|---|---|---|---|
Where several devices share a reset line, the supervisor has to behave well when the supply is only partially up. The MAX6753KA29 drives an open-drain output that stays low from the moment the rail reaches 1 V, so the whole chain is held until the 2.925 V threshold is crossed and the programmed delay has elapsed.
Its watchdog is a window rather than a plain timer. Strobe timing outside the band between the fast and slow edges is treated as a fault, which exposes firmware that is running but no longer doing its job. The fast edge is a divide ratio of 8, 16 or 64 of the slow edge, chosen by the SET0 and SET1 straps.
The slow edge comes from the SWT capacitor, tWD2 = 0.65 x 10^9 x CSWT, and the reset pulse from the SRT capacitor, tRP = 4.94 x 10^6 x CSRT. Because the two are independent, a processor that needs a long reset delay does not force a wide watchdog band.
The output sinks current with a pullup up to 6 V, so the same part can sit on a 3.3 V or 5 V reset bus. Quiescent current is 3.7 microamperes at 2 V and the part is specified to +125 degrees Celsius.
| Product Model | MAX6753 |
|---|---|
| Function | Processor reset IC with windowed watchdog timer |
| Reset Output | Open drain, active low |
| Factory Reset Threshold | 2.925 V typical (2.867 V min, 2.984 V max) |
| Threshold Accuracy | 2 percent over temperature |
| Threshold Hysteresis | 0.8 percent typical |
| Watchdog Type | Windowed, flags slow and fast WDI faults |
| Slow Watchdog Window | Capacitor set, tWD2 = 0.65 x 10^9 x CSWT |
| Fast Watchdog Window | tWD2 divided by 8, 16 or 64 via SET0 and SET1 |
| Watchdog Disable | SET0 high and SET1 low |
| Reset Timeout | Capacitor set, tRP = 4.94 x 10^6 x CSRT |
| Manual Reset Input | Not included |
| Adjustable Reset Input | Not included |
| Supply Voltage | 1.0 V to 5.5 V |
| Supply Current | 3.7 microamperes typical at 2 V |
| Reset Valid Down To | VCC = 1 V, pullup may sit at any voltage up to 6 V |
| VCC to Reset Delay | 20 microseconds |
| Operating Temperature | -40 to +125 degrees Celsius |
| Package | 8-pin SOT23 |
Reels are packed with desiccant and checked against the purchase order before shipping.
Shenzhen Mingjiada Electronics Co., Ltd. is an independent distributor of electronic components from established manufacturers. Founded in Shenzhen in 1996, Mingjiada has established branches in Hong Kong, Japan, Russia, and Taiwan.
Certified under ISO9001:2014 for quality management systems and ISO14001:2014 for environmental management systems. With an experienced team in sales, R&D and management, we specialize in distributing products from more than 500 established suppliers.
Adhering to the principle of "maximizing benefits for customers," we offer comprehensive product ranges and provide high-quality, responsive service through professional logistics and customer service teams.
Other product types we regularly stock and supply appear below.
| Part Number | Series |
|---|---|
| LTC3406ABES5 | LTC3406 |
| LTC2633HTS8-LZ8 | LTC2633 |
| ADS7956SRHBR | ADS7956 |
| LTC6431AIUF-15 | LTC6431 |
| ADM1490EBRMZ | ADM1490 |
| ISO6741FDWR | ISO6741 |
| MAX6699EE99 | MAX6699 |
| LTC4228CGN-2 | LTC4228 |
| AM3358BZCZ100 | AM3358 |
| MAX6071BAUT33 | MAX6071 |
| MAX16134ESC | MAX16134 |
| STEF05PUR | STEF05 |
| LT1395CS8 | LT1395 |
| MAX6730UTZD3 | MAX6730 |
| IGB50N65H5 | IGB50N65 |
| LMK6CE03333CDLER | LMK6CE03333CDLER |
| ADT7470ARQZ | ADT7470 |
Contact Person: Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753