Mingjiada Supply/Recycle ADI ADXL312 Low Power 3-Axis Digital Accelerometer
Mingjiada Electronics supplies and recycles the ADI ADXL312 low-power triaxial digital accelerometer (LFCSP-32) – a commonly used MEMS chip for drone and industrial attitude sensing
In drone flight control, gimbal stabilisation, vehicle black box systems and industrial vibration monitoring designs, the triaxial digital accelerometer is one of the core sensors that determine attitude calculation accuracy and system standby power consumption. The ADXL312 (commonly referred to as ADXL312ACPZ) from ADI (Analog Devices), with its ±12g measurement range, 13-bit resolution, typical operating current of 57μA and compact 32-pin LFCSP package, has become a cost-effective MEMS solution for small-to-medium payload drones and portable devices. Shenzhen Mingjiada Electronics Co., Ltd. – currently offers brand-new, genuine ADXL312 units in stock, whilst simultaneously operating a high-value buy-back service for surplus drone components, factory-surplus ADXL312 units and the full range of ADI sensors.
ADXL312 is a compact, slim, low-power triaxial accelerometer capable of high-resolution (13-bit) measurements of acceleration up to ±12 g. The digital output data is in 16-bit two’s complement format and can be accessed via SPI (3-wire or 4-wire) or I²C digital interfaces.
ADXL312 is suitable for automotive alarm or ‘black box’ applications. It can measure static gravitational acceleration in tilt detection applications, as well as dynamic acceleration caused by motion or impact. The device features high resolution (2.9 mg/LSB), capable of resolving tilt changes as small as 0.25°. The built-in FIFO facilitates the use of oversampling techniques to enhance tilt resolution to 0.05°.
ADXL312 Key Specifications at a Glance:
Type: Three-axis digital output MEMS accelerometer
Measurement range: Software-selectable ±1.5g / ±3g / ±6g / ±12g
Resolution: Fixed 10-bit; up to 13-bit (2.9 mg/LSB) at ±12g full scale
Interface: SPI (3/4-wire), I²C; 16-bit two’s complement output
Power consumption: Typically 57 μA @ 3.3 V in measurement mode; 0.1 μA in standby mode
Voltage: VS 2.0–3.6 V; VDD_I/O 1.7–3.6 V
Temperature range: −40 °C to +105 °C
Package: 32-LFCSP (5 × 5 × 1.45 mm)
ADXL312 Key Features:
Low power consumption: as low as 57 μA in measurement mode and 0.1 μA in standby mode at VS = 3.3 V (typical)
Power consumption automatically scales proportionally with bandwidth
User-selectable resolution
10-bit fixed resolution
Full resolution, with resolution increasing with the g-range, up to 13 bits at ±12 g (maintaining a scaling factor of 2.9 mg/LSB across the entire g-range)
Embedded FIFO technology significantly reduces the load on the host processor
Supply and I/O voltage range: 2.0 V to 3.6 V
Built-in motion detection for motion/non-motion monitoring
SPI (3-wire and 4-wire) and I²C digital interfaces
Flexible interrupt modes, mappable to any interrupt pin
Measurement range selectable via serial commands
Bandwidth selectable via serial commands
Wide temperature range (−40°C to +105°C)
Shock resistance: 10,000 g
Lead-free / RoHS-compliant
Compact and slim: 5 mm × 5 mm × 1.45 mm LFCSP package
Certified for automotive applications
Typical applications for the ADXL312:
Automotive alarms
Hill Start Assist (HSA)
Electronic braking systems
Data recorders (black boxes)
Drones: flight control attitude reference, black box impact recording, cargo compartment vibration monitoring
Robots/AGVs: slope detection, fall detection, power-on level calibration
Mingjiada Electronics provides customers with brand-new, genuine ADXL312 series chips in stock, as well as professional inventory recycling services, helping businesses achieve end-to-end management from chip procurement to inventory optimisation. For further product information, to request a quotation or to enquire about recycling services, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for more details on supply and demand.
Tags: ADXL312ACPZ, ADXL312ACP, ADXL312AC, ADXL312A, ADXL312
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753