company blog about Mingjiada Supply TI DS90UB914ATRHSRQ1 1.4Gbps High Speed FPD-Link III Deserializer

Mingjiada Supply TI DS90UB914ATRHSRQ1 1.4Gbps High Speed FPD-Link III Deserializer

[Shenzhen Mingjiada Electronics Co., Ltd.] Long term Supply TI DS90UB914ATRHSRQ1 1.4Gbps High Speed FPD-Link III Deserializer, the device supports high-speed video data transfer for cameras, displays and other sensor interfaces. Below are product details for DS90UB914ATRHSRQ1:

Part Number: DS90UB914ATRHSRQ1

Package: WQFN-48

Type: FPD-Link III Deserializer

DS90UB914ATRHSRQ1 offers an FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair. The DS90UB914ATRHSRQ1 device incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths.

DS90UB914ATRHSRQ1——The deserializer is targeted for connections between imagers and video processors in an ECU (Electronic Control Unit). DS90UB914ATRHSRQ1 is ideally suited for driving video data requiring up to 12-bit pixel depth plus two synchronization signals along with bidirectional control channel bus.

DS90UB914ATRHSRQ1 The deserializer features a multiplexer to allow selection between two input imagers, one active at a time. The primary video transport converts 10-bit or 12-bit data to a single high-speed serial stream, along with a separate low latency bidirectional control channel transport that accepts control information from an I2C port and is independent of video blanking period.

Product Attributes Of DS90UB914ATRHSRQ1

Function: Deserializer
Data Rate: 1.4Gbps
Input Type: FPD-Link III, LVDS
Output Type: LVCMOS
Number of Inputs: 1
Number of Outputs: 12
Voltage - Supply: 1.71V ~ 3.6V
Operating Temperature: -40°C ~ 105°C (TA)
Grade: Automotive
Qualification: AEC-Q100
Mounting Type: Surface Mount
Package / Case: 48-WFQFN Exposed Pad
Supplier Device Package: 48-WQFN (7x7)

Features Of DS90UB914ATRHSRQ1
Qualified for automotive applications AEC-Q100
– Device temperature grade 2: –40℃ to +105℃ ambient operating temperature range
– Device HBM ESD classification level ±8kV
– Device CDM ESD classification level C6
• 25MHz to 100MHz Input Pixel Clock Support
• Programmable data payload:
– 10-bit Payload up to 100-MHz
– 12-bit Payload up to 75-MHz
• Continuous low latency bidirectional control interface channel with I2C support at 400-kHz
• 2:1 Multiplexer to choose between two input images
• Capable of receiving over 15m coaxial or 20m shielded twisted-pair cables
• Robust Power-Over-Coaxial (PoC) operation
• Receive equalizer automatically adapts for changes in cable loss
• LOCK output reporting pin and @SPEED BIST diagnosis feature to validate link integrity
• Single power supply at 1.8-V
• ISO 10605 and IEC 61000-4-2 ESD compliant
• EMI/EMC mitigation with programmable spread spectrum (SSCG) and receiver staggered outputs

Applications Of DS90UB914ATRHSRQ1

• Automotive
– Surround view systems (SVS)
– Rear and front view cameras
– Driver monitor cameras (DMS)
– Remote satellite RADAR sensors
• Security and surveillance
• Industrial machine vision

Simplified Schematic Of DS90UB914ATRHSRQ1

The DS90UB914ATRHSRQ1 is a high performance, high reliability FPD-Link III serialiser for high bandwidth video transmission needs in automotive and industrial applications. Its low power design and excellent EMC/EMI performance make it ideal for use in complex environments.

Mingjiada Electronics offers a long term supply of TI's high performance FPD-Link III Serialiser DS90UB914ATRHSRQ1, which supports high bandwidth video transmission, ensures image quality and is designed for automotive and industrial applications. For more information about the DS90UB914ATRHSRQ1 serialiser, please visit the website of Mingjiada Electronics (https://www.integrated-ic.com/).