company blog about Original ADI ADN4694EBRZ High Speed M-LVDS Transceiver With Type 2 Receiver

Original ADI ADN4694EBRZ High Speed M-LVDS Transceiver With Type 2 Receiver

Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply ADI (ADN4694EBRZ) Multi-Point Low Voltage Differential Signaling Transceiver, Below are the product details for M-LVDS Transceiver ADN4694EBRZ:

ADN4694EBRZ——Basic Information:
Part Number: ADN4694EBRZ
Package: SOIC-8
Type: High Speed M-LVDS Transceiver
Product Details: ADN4694EBRZ——3.3V, 100Mbps, Half-Duplex, High Speed M-LVDS Transceiver with Type 2 Receiver.

Product Attributes Of ADN4694EBRZ
Type: Transceiver
Protocol: LVDS, Multipoint
Number of Drivers/Receivers: 1/1
Duplex: Half
Data Rate: 100Mbps
Voltage - Supply: 3.3V
Operating Temperature: -40°C ~ 85°C
Mounting Type: Surface Mount
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package: 8-SOIC

ADN4694EBRZ is multipoint, low voltage differential signaling (M-LVDS) transceivers (driver and receiver pairs) that can operate at up to 100 Mbps (50 MHz). Slew rate control is implemented on the driver outputs. The receivers detect the bus state with a differential input of as little as 50 mV over a common-mode voltage range of −1 V to +3.4 V. ESD protection of up to ±15 kV is implemented on the bus pins.

ADN4694EBRZ adhere to the TIA/EIA-899 standard for M-LVDS and complement TIA/EIA-644 LVDS devices with additional multipoint capabilities.

ADN4694EBRZ is Type 2 receivers exhibiting an offset threshold, guaranteeing the output state when the bus is idle (bus-idle fail-safe) or the inputs are open (open-circuit fail-safe).

ADN4694EBRZ is available as half-duplex in an 8-lead SOIC package.

Features Of ADN4694EBRZ
Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs)
Switching rate: 100 Mbps (50 MHz)
Supported bus loads: 30 Ω to 55 Ω
Choice of 2 receiver types
Type 2 (ADN4694EBRZ): threshold offset of 100 mV for open-circuit and bus-idle fail-safe
Conforms to TIA/EIA-899 standard for M-LVDS
Glitch-free power-up/power-down on M-LVDS bus
Controlled transition times on driver output
Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise

Applications Of ADN4694EBRZ
Backplane and cable multipoint data transmission
Multipoint clock distribution
Low power, high speed alternative to shorter RS-485 links
Networking and wireless base station infrastructure

ADN4694EBRZ——Functional Block Diagrams

[Mingjiada Electronics] Long Term Supply ADI (ADN4694EBRZ) Multi-Point Low Voltage Differential Signaling (M-LVDS) Transceiver, For more product information about ADN4694EBRZ, please visit the official website of Mingjiada Electronics (https://www.integrated-ic.com/).