company blog about Supply TI Original AM26LV32EIPWR Quadruple Differential Line Receiver

Supply TI Original AM26LV32EIPWR Quadruple Differential Line Receiver

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supplier of TI (AM26LV32EIPWR) low-voltage, high-speed four-channel differential line receivers with +/-15kV IEC ESD protection. Below are the product details for the AM26LV32EIPWR:

AM26LV32EIPWR — Basic Information:
Model: AM26LV32EIPWR
Package: TSSOP-16
Type: Four-channel differential line receiver
Product Description: The AM26LV32EIPWR is a low-voltage, high-speed four-channel differential line receiver with ±15kV IEC ESD protection.

AM26LV32EIPWR Specifications:
Type: Receiver
Protocol: RS422, RS485
Driver/Receiver Count: 0/4
Receiver Hysteresis: 35 mV
Voltage - Supply: 3V to 3.6V
Operating Temperature: -40°C to 85°C
Mounting Type: Surface Mount
Package/Case: 16-TSSOP (0.173", 4.40mm wide)
Supplier Device Package: 16-TSSOP

AM26LV32EIPWR consists of four differential line receivers and features three-state outputs. The AM26LV32EIPWR is designed to meet the requirements of TIA/EIA-422-B and ITU Recommendation V.11 drivers at a lower supply voltage.

AM26LV32EIPWR is optimised for balanced bus transmission at switch rates up to 32MHz. With its three-state outputs, the device can be directly connected to bus-organised systems.

AM26LV32EIPWR includes a fault protection circuit that prevents unknown voltage signals from being applied to the receiver output terminals. In the event of an open-circuit fault, a high-level state is generated at the corresponding output terminal.

AM26LV32EIPWR supports local power-down applications using the I off circuit. The I off circuit disables the output to prevent current backflow from damaging the device when power is disconnected.

AM26LV32EIPWR Product Features:
Operates on a single 3.3V power supply
Switching frequency up to 32MHz
ESD protection on RS422 bus pins (see ESD rating)
Low power consumption: 27mW (typical)
Open-circuit failure protection
±7V common-mode input voltage range with ±200mV sensitivity
Accepts 5V logic inputs and 3.3V power supply (enable input)
Input hysteresis: 35 mV (typical)
Pin-compatible with AM26C32 and AM26LS32
I off supports local power-down mode operation

AM26LV32EIPWR Applications:
High-reliability automotive applications
Configuration control and printing support
ATM and currency counters
Smart grids
AC and servo motor drivers

AM26LV32EIPWR is a high-performance, highly reliable four-channel differential line receiver. With its high-speed response, low power consumption, robust ESD protection, and comprehensive fault protection mechanisms, the AM26LV32EIPWR is an ideal choice for differential communication interfaces in industrial, automotive, and communication applications.

Mingjiada Electronics has been supplying TI's (AM26LV32EIPWR) four-channel differential line receiver for an extended period. For more information about the AM26LV32EIPWR product, please visit Mingjiada Electronics' official website (https://www.integrated-ic.com/) to inquire about supply details.