In today’s era of the Internet of Things (IoT) and Industry 4.0, portable measurement devices and battery-powered sensor nodes place stringent demands on the power consumption, analog performance, and package size of main control chips. The Texas Instruments (TI) MSPM0L1304TDGS20R, available in stock from Mingjiada Electronics’ Shenzhen distributor, is a cost-effective microcontroller designed specifically to address these challenges.
Core Application Scenarios: Battery-Powered Portable Sensing and Industrial Control
The MSPM0L1304TDGS20R is particularly well-suited for the following scenarios:
Portable medical and health devices (e.g., fingertip pulse oximeters, handheld thermometers)
Industrial sensors and transmitters (4–20 mA loop-powered, temperature/pressure transmitters)
Battery-powered consumer electronics (smart wearables, electronic locks, wireless sensor nodes)
Lighting and motor control (DALI digital dimming, small BLDC motor drivers)
MSPM0L1304TDGS20R Product Overview
The MSPM0L1304TDGS20R is part of TI’s next-generation MSPM0 series, based on the Arm® Cortex®-M0+ core with a clock speed of up to 32 MHz. It integrates a rich set of high-performance analog peripherals and an ultra-low-power architecture within an extremely compact 20-pin VSSOP package, making it an ideal choice for cost-sensitive and space-constrained designs.
MSPM0L1304TDGS20R Key Specifications
Core Processor: Arm® 32-bit Cortex®-M0+, up to 32 MHz
Memory: 16 KB Flash, 2 KB SRAM
Operating Voltage: 1.62 V to 3.6 V
Temperature Range: -40°C to 105°C (meets industrial-grade requirements)
Package: 20-VSSOP (3.00 mm width)
Number of GPIOs: 17
Key Advantages: High-Performance Analog Integration
Compared to other MCUs in the same class on the market, the MSPM0L1304’s standout feature is the level of integration of its analog peripherals:
12-bit ADC: With a sampling rate of up to 1.68 Msps, support for up to 10 external channels, and built-in 1.4V/2.5V reference voltages, it meets high-precision data acquisition requirements.
Zero-Drift Operational Amplifiers (OPA): Integrates two zero-drift, zero-crossing chopper operational amplifiers with a temperature drift as low as 0.5 µV/°C and an input bias current of only 6 pA, making them ideal for amplifying weak sensor signals (such as thermocouples and bridge sensors).
High-Speed Comparator (COMP): Propagation delay of only 32 ns, featuring an 8-bit reference DAC, suitable for overcurrent protection or threshold detection.
Communication Interfaces: Supports 2x UART (including LIN, IrDA, and DALI protocols), 2x I²C (FM+ 1 Mbit/s), and 1x SPI.
Ultra-Low Power Characteristics
For battery-powered applications, this chip features optimized low-power modes:
Active Mode: 71 µA/MHz (CoreMark test)
Standby Mode: 1.0 µA (SRAM/registers fully retained, 32 kHz timer active)
Shutdown Mode: Only 61 nA, supports I/O wake-up
Why Choose Mingjiada Electronics (Shenzhen)?
As a seasoned electronic component distributor founded in 1996, Shenzhen Mingjiada Electronics Co., Ltd. has been deeply rooted in the industry for nearly three decades and possesses the following core advantages:
Guarantee of Genuine Products: Strict control over sourcing ensures that all TI chips are genuine factory products, accompanied by original manufacturer certificates and environmental compliance documentation.
Extensive Stock Inventory: With over 2 million stock SKUs, we can quickly respond to urgent orders and BOM fulfillment requests.
Global Supply Network: Headquartered in the core commercial district of Huaqiangbei, Shenzhen, we leverage a global supply chain to provide flexible small-batch sample procurement and high-volume delivery services.
Summary
Whether building high-precision industrial sensors or designing long-battery-life wearable medical devices, the MSPM0L1304TDGS20R is a highly competitive choice thanks to its powerful analog performance, nanoampere-level power consumption, and compact package.
Please contact Mingjiada Electronics (Shenzhen) for samples and price quotes!
Contact Information:
Phone: 86-755-83294757 / 13410018555
Email: sales@hkmjd.com
Address: Rooms 1239–1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province
Your message must be between 20-3,000 characters!
English
