company blog about TI Original Chips TCAN11625DMTRQ1 Automotive CAN FD System Basis Chip

TI Original Chips TCAN11625DMTRQ1 Automotive CAN FD System Basis Chip

Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply TI (TCAN11625DMTRQ1) Automotive controller area network (CAN) system basis chips, The following are the product details for TCAN11625DMTRQ1:

TCAN11625DMTRQ1——Basic Information:
Part Number: TCAN11625DMTRQ1
Package: VSON-14
Type: Automotive CAN FD System Basis Chip
Product Details: TCAN11625DMTRQ1——Automotive CAN-FD transceiver with integrated 5V supply and 5V, 100mA LDO.

TCAN11625DMTRQ1 is high-speed controller area network (CAN) system basis chips (SBC), TCAN11625DMTRQ1 supports both classical CAN and CAN FD networks up to 8 megabits per second (Mbps).

TCAN11625DMTRQ1 support a wide input supply range and integrates some form of an LDO output. The TCAN11625DMTRQ1 has a 5V LDO output (VCCOUT) which supplies the CAN transceiver voltage internally as well as additional current externally.

TCAN11625DMTRQ1 allows for system-level reductions in battery current consumption by selectively enabling the various power supplies that may be present on a system via the INH output pin. This allows an ultra-low-current sleep state where power is gated to all system components except for the TCAN11625DMTRQ1, while monitoring the CAN bus. When a wake-up event is detected, the TCAN11625DMTRQ1 initiates system start-up by driving INH high.

The TCAN11625DMTRQ1 supports an ultra low-power standby mode where the high-speed transmitter and normal receiver are switched off and a low-power wake-up receiver enables remote wake-up via the ISO 11898-2:2016 defined wake-up pattern (WUP).

TCAN11625DMTRQ1 includes internal logic level translation via the VIO terminal to allow for interfacing directly to 1.8V, 2.5V, 3.3V, or 5V controllers. The TCAN11625DMTRQ1 transceiver includes many protection and diagnostic features including undervoltage detection, over voltage detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and bus fault protection up to ±58V.

Features For The TCAN11625DMTRQ1
Wide input operational voltage range
Integrated LDO for CAN transceiver supply
5V LDO with 100mA output current capability - TCAN11625DMTRQ1
Classic CAN and CAN FD up to 8Mbps
VIO level shifting supports: 1.7V to 5.5V
Operating modes
Normal mode
Standby mode
Low-power sleep mode
High-voltage INH output for system power control
Local wake-up support via the WAKE pin
Defined behavior when unpowered
Bus and IO terminals are high impedance (no load to operating bus or application)

Protection Features Of TCAN11625DMTRQ1:
±58V CAN bus fault tolerant
Load dump support on VSUP
IEC ESD protection
Under-voltage and over-voltage protection
Thermal shutdown protection
TXD dominant state timeout (TXD DTO)

TCAN11625DMTRQ1—— Applications:
Advanced driver assistance system (ADAS)
Body electronics and lighting
Automotive infotainment and cluster
Hybrid, electric and powertrain systems

[Mingjiada Electronics] Long Term Supply TI (TCAN11625DMTRQ1) Automotive CAN FD System Basis Chip, For more information about TCAN11625DMTRQ1 or to inquire about pricing, please visit the Mingjiada Electronics official website (https://www.integrated-ic.com/) to check supply details.