ATSAM3U1CB-CU Microcontroller MCU 96MHz ARM Cortex M3 Microcontrollers 32Bit MCU

ATSAM3U1CB-CU Microcontroller MCU 96MHz ARM Cortex M3 Microcontrollers 32Bit MCU​

Product Description Of ATSAM3U1CB-CU

ATSAM3U1CB-CU is a member of the SAM3U family of flash microcontrollers based on the high-performance 32-bit ARM Cortex®-M3 RISC processor.

ATSAM3U1CB-CU operates at a maximum speed of 96MHz and features 64KB of flash memory and 20KB of SRAM.

ATSAM3U1CB-CU The peripheral set includes a High Speed USB device and PHY at 480Mbps, high-speed multimedia card interface for SDIO/SD/MMC, a 16-bit external bus interface supporting NAND flash, three USARTs, TWI (I2C), four SPIs, I2S, four PWM timers, three 16-bit timers, RTC, four 12-bit and four 10-bit ADCs.

Specification Of ATSAM3U1CB-CU

Features Of ATSAM3U1CB-CU

ARM Cortex-M3 revision 2.0 running at up to 96 MHz
Memory Protection Unit (MPU)
Thumb®-2 instruction set
64 Kbytes Dual Plane embedded Flash, 128-bit wide access, memory accelerator, dual bank
20 Kbytes embedded SRAM
16 Kbytes ROM with embedded bootloader routines (UART, USB) and IAP routines
Static Memory Controller (SMC): SRAM, NOR, NAND support. NAND Flash controller with 4 Kbytes RAM buffer and ECC
External Bus Interface - 8 or 16 bits, 4 chip selects, 24-bit address
Embedded voltage regulator for single-supply operation
POR, BOD and Watchdog for safe reset
Quartz or resonator oscillators: 3 to 20 MHz main and optional low power 32.768 kHz for RTC or device clock
High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz Default Frequency for fast device startup
Slow Clock Internal RC oscillator as permanent clock for device clock in low power mode
One PLL for device clock and one dedicated PLL for USB 2.0 High Speed Device
17 Peripheral DMA Controller (PDC) channels and 4-channel central DMA
Sleep, Wait, and Backup modes, down to 1.65 μA in Backup mode with RTC, RTT, and GPBR
100-lead LQFP – 14 × 14 mm, pitch 0.5 mm
100-ball TFBGA – 9 × 9 mm, pitch 0.8 mm
Industrial (-40° C to +85° C)
USB 2.0 Device: 480 Mbps, 4-Kbyte FIFO, up to 7 bidirectional Endpoints, dedicated DMA

Other Electronic Components In Stock 

FAQ
Q. Are your products original?
A: Yes, all products are original, new original import is our purpose.
Q:Which Certificates do you have?
A:We are ISO 9001:2015 Certified Company and member of ERAI.
Q:Can you support small quantity order or sample?Is the sample free?
A:Yes,we support sample order and small order.Sample cost is different according to your order or project.
Q:How to ship my order? Is it safe?
A:We use express to ship,such as DHL,Fedex,UPS,TNT,EMS.We can also use your suggested forwarder.Products will be in good packing and ensure the safety and we are responsible to product damage to your order.
Q:What about the lead time?
A:We can ship stock parts within 5 working days.If without stock,we will confirm lead time for you based on your order quantity.